Table of Contents
Advertisement
Quick Links
P R O B L E M S O LV E D
Installation and Operation Manual
Switcher/Router with Mechanical Latching Relays
If you need a firmware upgrade, contact Broadcast Tools®
No part of this document may be reproduced or distributed without permission.
ALL SPECIFICATIONS AND FEATURES FOR THIS PRODUCT ARE SUBJECT TO
NOTE: We recommend the use of Chrome, Firefox or Safari as your browser.
Due to the dynamic nature of product design, the information contained in this
document is subject to change without notice. Broadcast Tools, Inc., assumes no
responsibility for errors and/or omissions contained in this document. Revisions
of this information or new editions may be issued to incorporate such changes.
Broadcast Tools® is a registered trademark of Broadcast Tools, Inc.
tiny TOOLS™ is a trademark of Broadcast Tools, Inc.
All Sentinel® labeled products are registered trademarks of Broadcast Tools, Inc.
Copyright® 1989 - 2012 by Broadcast Tools, Inc. All rights reserved.
No part of this document may be reproduced or distributed without permission.
Visit www.broadcasttools.com for important product update information.
SS 2.1 MLR/BNC
Manual update: 09/04/2012
CHANGE WITHOUT NOTICE
®
Advertisement
Table of Contents
Related Manuals for Broadcast Tools SS 2.1 MLR
Summarization of Contents
Introduction
Safety Information
Essential safety guidelines for installing Broadcast Tools products.
Who to Contact for Help
Contact details and resources for product assistance.
Product Overview
Features/Benefits
Highlights the key features and advantages of the SS 2.1 MLR/BNC.
Applications
Lists various switching and routing applications for the device.
Installation
Surge Protection
Recommendation for surge protectors and line conditioners for AC line.
UPS Standby Power System
Advice on connecting the unit to a UPS for power outage protection.
Installation/Operation
Selection push buttons
Explanation of front panel push buttons and LED indicators for channel selection.
LED indicators
Description of the front panel LED indicators and their meanings.
Power
Instructions for connecting the power supply to the unit.
I/O and Remote Control Connectors
Remote Control Wiring
Details on wiring for remote control via euroblock terminals.
Remote Control
Explanation of remote control via contact to ground or 5-volt logic.
Relays
Information on SPDT relay contacts for remote channel status indication.
SERIAL OPERATION
RS-232 Control
Instructions for connecting and controlling the unit via RS-232 serial port.
Need help?
Do you have a question about the SS 2.1 MLR and is the answer not in the manual?
Questions and answers