Broadcast Tools SS 2.1 MLR/TERM Installation And Operation Manual
  1. Manuals
  2. Brands
  3. Broadcast Tools Manuals
  4. Switch
  5. SS 2.1 MLR/TERM
  6. Installation and operation manual

Broadcast Tools SS 2.1 MLR/TERM Installation And Operation Manual

Switcher/router with mechanical latching relays
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
P R O B L E M   S O LV E D
Installation and Operation Manual
Switcher/Router with Mechanical Latching Relays
If you need a firmware upgrade, contact Broadcast Tools®
No part of this document may be reproduced or distributed without permission.
ALL SPECIFICATIONS AND FEATURES FOR THIS PRODUCT ARE SUBJECT TO
NOTE: We recommend the use of Chrome, Firefox or Safari as your browser.
Due to the dynamic nature of product design, the information contained in this
document is subject to change without notice. Broadcast Tools, Inc., assumes no
responsibility for errors and/or omissions contained in this document. Revisions
of this information or new editions may be issued to incorporate such changes.
Broadcast Tools® is a registered trademark of Broadcast Tools, Inc.
tiny TOOLS™ is a trademark of Broadcast Tools, Inc.
All Sentinel® labeled products are registered trademarks of Broadcast Tools, Inc.
Copyright® 1989 - 2012 by Broadcast Tools, Inc. All rights reserved.
No part of this document may be reproduced or distributed without permission.
Visit www.broadcasttools.com for important product update information.
SS 2.1 MLR/TERM
Manual update: 03/19/2013
CHANGE WITHOUT NOTICE
®

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SS 2.1 MLR/TERM and is the answer not in the manual?

Questions and answers

Related Manuals for Broadcast Tools SS 2.1 MLR/TERM

Summary of Contents for Broadcast Tools SS 2.1 MLR/TERM

  • Page 1 NOTE: We recommend the use of Chrome, Firefox or Safari as your browser. Due to the dynamic nature of product design, the information contained in this document is subject to change without notice. Broadcast Tools, Inc., assumes no responsibility for errors and/or omissions contained in this document. Revisions of this information or new editions may be issued to incorporate such changes.

  • Page 2: Table Of Contents

    SS 2.1 MLR/TERM Installation and Operation Manual Table of Contents Section Title Page # Introduction............3 Safety Information .

  • Page 3: Introduction

    SS 2.1 MLR/TERM Installation and Operation Manual INTRODUCTION CAUTION! Thank you for your purchase of a BROADCAST TOOLS® SS 2.1 MLR/TERM trans- parent two input, dual output switcher/router (referred to as the SS 2.1 MLR/TERM Broadcast Tools® throughout this manual). We’re confident that this product will give you many years of Products, as with any dependable service.

  • Page 4: Overview

    Inputs may be balanced or unbalanced, while output levels, impedance, distortion, noise and balancing will match that of the selected input. The SS 2.1 MLR/TERM can be controlled and mon- itored locally and/or with simple contact closures to ground, as well with multi-drop RS-232 serial commands.

  • Page 5: Inspection

    UPS Standby Power System We recommend that you connect your SS 2.1 MLR/TERM to a UPS system. A UPS helps minimize the risk to the SS 2.1 MLR/TERM and provides power during a power outage.

  • Page 6: I/O And Remote Control Connectors

    MLR/TERM in high RF modular RJ-11 jack. environments should be performed with care. The SS 2.1 MLR/TERM interfaces to external equipment through removable euroblock screw terminals. The terminals accommodate wire sizes from 16 - 28 station ground AWG solid or stranded wire. Before installing a wire, remove the euroblock screw should be connected to terminal plug and turn each capture screw fully counterclockwise.

  • Page 7: Configuration Dip-Switch Setup

    SS 2.1 MLR/TERM Installation and Operation Manual Configuration DIP-switch Setup (SW5) Follow the tables below for configuration options. Unit ID SW5-1 SW5-2 ID 0 * ID 1 ID 2 ID 3 Baud Rate SW5-3 SW5-4 2400 9600 * 19200 38400...

  • Page 8: Sage Endec Eas Installation Guidelines

    “Relay,” 1200 baud, and the desired station ID. Connect the S9 modular Visit our web site for cable to the RJ11 jack on the SS 2.1 MLR/TERM. Make sure SW-5 on the SS 2.1 product updates and MLR/TERM is configured according to the settings listed above.

  • Page 9: Serial Operation

    SS 2.1 MLR/TERM Installation and Operation Manual SERIAL OPERATION RS-232 Control Connect one end of the modular cable to the RJ11 jack on the rear panel of the prod- uct and the other end to the RJ11 to the jack on the “S9” 9-pin female D-sub adapter.

  • Page 10: Specifications

    SS 2.1 MLR/TERM Installation and Operation Manual SPECIFICATIONS Inputs/Outputs: Any input level and impedance can be used. Inputs may be bal- anced or unbalanced. Output levels, impedance, distortion, noise and balancing will match that of the selected input. Switching Method: Passive.

  • Page 11: Warranty

    If Broadcast Tools is notified, in writing, of a failure of any item manufactured by Broadcast Tools to conform to the foregoing Limited Warranty within one (1) year following the date of the Buyer’s acquisition of the item, and if the item is returned to Broadcast Tools in accordance with Broadcast Tools’...
  • Page 12 SS 2.1 MLR/TERM Installation and Operation Manual FRONT PANEL REAR PANEL APPENDIX e-mail: voice: fax: support@broadcasttools.com 360.854.9559 866.783.1742...
  • Page 13 SS 2.1 MLR/TERM Installation and Operation Manual APPENDIX e-mail: voice: fax: support@broadcasttools.com 360.854.9559 866.783.1742...
  • Page 14 SS 2.1 MLR/TERM Installation and Operation Manual APPENDIX e-mail: voice: fax: support@broadcasttools.com 360.854.9559 866.783.1742...
  • Page 15 SS 2.1 MLR/TERM Installation and Operation Manual APPENDIX e-mail: voice: fax: support@broadcasttools.com 360.854.9559 866.783.1742...

Table of Contents