Download Print this page

Advertisement

INSTRUCTIONS FOR USE
COUNTRY
NATURAL GAS
Great-Britain/
ATLANTA / SAVANNAH NG
Ireland
ECO 550 / ECO 650 / ECO 750 NG
Italia
ATLANTA / SAVANNAH NI
ECO 550 / ECO 650 / ECO 750 NI
España
ATLANTA / SAVANNAH NE
ECO 550 / ECO 650 / ECO 750 NE
Portugal
ATLANTA / SAVANNAH NP
ECO 550 / ECO 650 / ECO 750 NP
ATLANTA
SAVANNAH
ECO 550
ECO 650
ECO 750
INSTALLATION INSTRUCTIONS
PROPANE
ATLANTA / SAVANNAH PG
ECO 550 / ECO 650 / ECO 750 PG
ATLANTA / SAVANNAH PI
ECO 550 / ECO 650 / ECO 750 PI
ATLANTA / SAVANNAH PE
ECO 550 / ECO 650 / ECO 750 PE
ATLANTA / SAVANNAH PP
ECO 550 / ECO 650 / ECO 750 PP

Advertisement

loading
Need help?

Need help?

Do you have a question about the SAVANNAH and is the answer not in the manual?

Questions and answers

Summarization of Contents

Instructions for Use
Introduction
Provides a welcome and advises reading instructions before first use.
Appliance Protection Systems
Details built-in safety systems like thermo-electric shut-off and flue gas protection.
Critical Safety Warnings
Lists critical safety warnings regarding appliance operation, flammable materials, and supervision.
Operation General
Explains how to open the flap and operate the thermostatic and sliding knobs for burner control.
Igniting the Fire
Step-by-step guide for safely igniting the pilot light and main burner.
Turning Off the Fire
Instructions on how to extinguish the main burner and pilot light.
Extinguishing the Pilot Light
Details on how to turn off the pilot light and when to close the gas supply valve.
First Time Use
Advises on initial burning-in of lacquer and initial smell, and cleaning glass deposits.
Daily Maintenance
Outlines regular checks for air supply, dust removal, and cleaning the appliance.
Installation Instructions
General Installation Requirements
States the appliance must be installed by a qualified engineer, following regulations and chimney advice.
Flue Protection System
Explains the T.T.B. security system that shuts off the appliance due to flue gas issues.
Installation Preparations
Details regulatory considerations for naturally and mechanically ventilated houses.
Naturally Ventilated House
Requirements for combustion air supply and flue gas exhaust in naturally ventilated homes.
Mechanically Ventilated House
Requirements for combustion air supply and flue gas extraction fan in mechanically ventilated homes.
General Service Requirements
Covers flue requirements, combustion air supply, thermostat sensor, and gas connection specifications.
Flue Requirements
Specifies flue length, draw, pipe material, and protective cap for proper operation.
Combustion Air Supply
Details regulations and minimum dimensions for the combustion air supply opening.
Thermostat Sensor
Describes the thermostat sensor's location and importance for service maintenance.
Gas Connection
Specifies the gas connection size, type, and piping requirements.
Appliance Positioning Guidelines
Provides guidelines for clearances, floor support, protective plates, and flammable material placement.
Chimney Connection Options
Explains the factory-fitted top connection and how to switch to a rear connection.
Soapstone Panel Placement
Illustrates and describes the process of positioning the soapstone panels for specific models.
Chimney Connection Details
Details connecting the flue pipe/liner to the appliance, ensuring a gas-tight seal.
Gas Connection Details
Emphasizes ensuring the gas pipe is not kinked and the regulating block is not stressed.
Gas Connection Checks
Outlines the procedure for checking gas connections for leaks using soapy water or a leak tester.
Ceramic Log Set Placement
Instructs on distributing vermiculite and positioning ceramic logs correctly for proper burner function.
Post-Installation Checks
Details checking gas flames color/height and verifying no flue leakage after installation.
Maintenance
Annual Maintenance Procedure
Lists the annual checks and cleaning procedures to be performed by an authorized engineer.
Disassembly and Assembly
Disassembly Procedures
Step-by-step disassembly instructions, including model-specific procedures for front and glass removal.
Assembly Procedures
Instructions to reassemble the appliance in reverse order and re-check gas connections.
Dimensions
ATLANTA/SAVANNAH Dimensions
Provides detailed technical drawings with dimensions for the ATLANTA/SAVANNAH models.
ECO 550 Dimensions
Provides detailed technical drawings with dimensions for the ECO 550 model.
ECO 650 Dimensions
Provides detailed technical drawings with dimensions for the ECO 650 model.
ECO 750 Dimensions
Provides detailed technical drawings with dimensions for the ECO 750 model.
Technical Details and Regulations
Technical Specifications
Lists detailed technical specifications, gas types, pressures, and component details for all models.
Replacement Parts List
Parts for ATLANTA/SAVANNAH/ECO 550/650/750
Catalog of part numbers and descriptions for ordering replacement components for all listed models.