Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for turck TX705 HMI/PLC
Summarization of Contents
About This Document
Target Groups
Aimed at qualified personnel for mounting, commissioning, operating, and maintaining the device.
Explanation of Symbols Used
Defines symbols like DANGER, WARNING, CAUTION, NOTICE, and NOTE used in the manual for safety and information.
Other Documents
Lists available supporting documents such as data sheets and installation guides.
Product Overview
Product Identification
Identifies the specific models within the TX700 HMI/PLC series covered by the manual.
Type Code
Explains the structure and meaning of the type code for product identification and configuration.
List of Available Devices
Provides a list of all available device models with their corresponding part numbers.
Standards and Approvals
Special Instruction for Use
Details specific operational and installation requirements for safety and compliance, including pollution degree and enclosure.
Technical Specifications
Technical Data
Presents detailed technical specifications including touchscreen, display, CPU, memory, and ports for all models.
Environmental Conditions and Protection Class
Specifies operating temperature, storage, humidity, vibrations, shock, and protection class ratings (IP66/IP20).
Electromagnetic Compatibility (EMC)
Details EMC compliance, including radiated disturbance and immunity test results according to EN standards.
TX705 Dimensions
Provides dimensional drawings and measurements for the TX705 model, including cut-out dimensions.
TX707/TX710/TX715/TX721 Dimensions
Provides dimensional drawings and measurements for TX707, TX710, TX715, and TX721 models.
Installing the HMI
Installation Environment
Guidance on suitable installation environments and precautions against sunlight and corrosive compounds.
HMI Mounting
Instructions and references for proper mounting procedures to meet protection class requirements.
Connecting
Connecting TX705
Illustrates connection options and ports for the TX705 model, including USB, power, serial, and Ethernet.
TX707/TX710/TX715/TX721 Connections
Illustrates connection options and ports for TX707, TX710, TX715, and TX721 models.
Serial Port
Details the serial port functionality, available electrical standards (RS232, RS422/RS485), and pin assignments.
Ethernet Ports
Explains the status indicators for the Ethernet ports, indicating link status and activity.
SD Card Slot
Specifies supported types (SD, SDHC) and maximum size for the SD card slot.
USB Port
Details allowed formatting (FAT, FAT32) and maximum size for files stored on the USB port.
Optional Plug-in Modules
Slot Assignment – CAN-Port
Maps physical interfaces to CODESYS network parameters for CAN port assignments.
Slot Assignment – Serial Interfaces
Maps physical interfaces to CODESYS parameters for serial interface assignments.
Plug-in Module Installation Procedure
Step-by-step guide for installing optional plug-in modules into the HMI extension slots.
Connecting the Power Supply
Grounding the Device
Explains the procedure and requirements for grounding the unit to prevent interference and ensure safety.
Battery
TX705 Battery Position
Diagram showing the location of the rechargeable battery within the TX705 HMI.
TX707/TX710/TX715/TX721 Battery Position
Diagrams showing the location of the rechargeable battery within TX707, TX710, TX715, TX721 HMIs.
Getting Started
Programming with CODESYS
Instructions for installing CODESYS runtime and package for HMI/PLC programming.
Programming with TX VisuPro
Guidance on installing TX VisuPro for HMI/PLC programming and transferring projects via Ethernet or USB.
Adapting System Settings
Access System Settings in User Mode
How to access and modify system settings through the HMI interface or web browser in user mode.
Access System Settings in System Mode
Procedures for accessing system settings in system mode, including recovery and advanced configurations.
Unpacking and Packing the Device
Unpacking TX705/TX707/TX710
Visual guide for the unpacking procedure of TX705, TX707, and TX710 HMI models.
Unpacking TX715/TX721
Visual guide for the unpacking procedure of TX715 and TX721 HMI models.
Appendix: Accessories
Plug-in Extension Modules
Details of available plug-in modules, including CAN, serial, and multifunction I/O options.
Mounting Material & Power Supply Connector
Lists mounting kits for different screen sizes and the power supply connector.
USB/SD Accessories
Lists accessories like SD cards, USB memory sticks, and extension cables.
Need help?
Do you have a question about the TX705 HMI/PLC and is the answer not in the manual?
Questions and answers