Table of Contents
Advertisement
English
Installing Hood
1. Hang hood from (4) Mounting Screws (from parts bag). Be sure to place
a washer (included) onto each screw before driving in the screw. Slide
hood towards wall until mounting screws are engaged in narrow end of (4)
Keyholes. Tighten mounting screws securely.
2. Replace bottom cover.
3. Connect ductwork to hood. Use Duct Tape to make joints secure and air tight.
4. Install (1) PAR 20, 75W incandescent light.
CAUTION: Bulbs may be hot! Refer to bulb packaging for further information.
proper operation.
2000 series, purchased separately on 1000 series) in place of the aluminum
9
KEYHOLE
(4)
MOUNTING
SCREW
(4)
DUCT
TAPE
Advertisement
Table of Contents
