Installing Hood - Haier 5000 Series User Manual

English

Installing Hood

1. Hang hood from (4) Mounting Screws (from parts bag). Be sure to place
a washer (included) onto each screw before driving in the screw. Slide
hood towards wall until mounting screws are engaged in narrow end of (4)
Keyholes. Tighten mounting screws securely.
2. Replace bottom cover.
4. Install (2) dimmable PAR 20, 8W LED lights. Please note that the LED lights
(2) dimmable
PAR 20,
8W LED lights
CAUTION: Bulbs may be hot! Refer to bulb packaging for further information.
5. Replace filters*, turn on power at service panel, and test range hood for
proper operation.
* If hood is to be installed Non-Ducted, install the HEPA filters in place of
the aluminum filters that were removed earlier. The HEPA filters can be
found in a plastic bag labeled as such included with your unit. For Ducted
installations, reinstall the aluminum filters.
11
KEYHOLE
(4)
MOUNTING
SCREW
(4)
DUCT
TAPE