Adding/Editing A Panel - Sharp PN-V601 Operation Manual

2) Buttons
The buttons perform the following actions:
Name
Add Panel
Add Group
Edit
Delete
Manual Control
Exit
●Adding/editing a panel
1. Click [Add Panel] to add a new panel to manage.
The [Add Panel (Panel PC)] dialog box will appear.
Click [Edit] to edit an existing panel.
The [Edit Panel (Panel PC)] dialog box will appear.
The settings for the [Add Panel (Panel PC)] and [Edit Panel (Panel PC)] dialog boxes are the
same. Panels can also be edited after they have been added.
2. Set the options.
1) Panel name (Compulsory)
Choose a name that will make it easy to identify the
panel. (Names must be within 50 characters)
2) Group
In the Group box, select a group to add the panel to.
If you do not want to assign the panel to any particular
group, select "(none)". Panels that are not assigned to
any particular group will be added under "All Panels".
Clicking [Add Panel] while the "List of registered
panel" tree group or a panel assigned to a group is
selected will add the panel to the respective group.
3) Host name or IP address (Compulsory)
Sets the host name or IP address of target PC which can be accessed from the server.
It is not possible to create two or more panels with the same host name or IP address.
Description
Adds a new panel to be managed.
Adds a new group.
Changes the content of the selected panel or group.
Deletes the selected panel or group.
Sets panels and control commands to be controlled manually.
Closes the [Panel Management] window.
Panel Management and Option
Managing panels
Relevant page
F Below
F p.80
F Below, p.80
F p.81
F p.81
-
79