Sharp PN-V601 Operation Manual page 101

[Display Area] tab
• "Display area for distributed program"
When the display area of the program and the resolution
of the panel are different, this tab allows you to display the
program regardless of the display area set for the program.
Check the "Always display the distributed program in the
following area" check box and set the area in which the
program is to be displayed.
[Power Control] tab
Manages power on target PCs currently being configured.
• "Shutdown on the designated time" check box
Check this box to turn off the target PC at the specified time.
• "Reboot on the designated time" check box
Check this box to restart the target PC at the specified time.
[FTP Server] tab
Sets the FTP Server.
• "User name": Must be kept within 30 alphanumeric
characters.
• "Password": Must be kept within 30 alphanumeric
characters.
• "Port Number": Enter a value between 1 and 32000.
If you have installed the Viewer Version, a unique FTP Server will be installed, and started as a
service. The default TCP/IP port numbers are 20 and 21. If this port number is already used by
another service, change the port number. The FTP settings of the panels registered with "Panel
Management" on the control PC must use the same port number. (Fp.80)
[Panel Control] tab
• "No panel" option button
Panels will not be controlled.
• "Single panel" option button
Click [Connection Setting] and select the panel control
method (RS-232C/LAN).
• [Connection Setting]
Select either "RS-232C" or "LAN" from the [Connecting
interface] option buttons.
Setting
COM port
RS-232C
Baud Rate
Host name or IP
address
Data port
LAN
User name
Password
Description
COM1~COM256
9600, 19200, 38400
Enter the host name or the IP address of the panel to be
controlled within 32 alphanumeric characters.
Enter a data port number between 1025 and 65535 for the
panels to be controlled.
Enter the username, if one exists for the panels to be
controlled, in 8 characters or less.
Enter the password, if one exists for the panels to be
controlled, in 8 characters or less.
FTP Server/Client Scheduler
Client Scheduler
Default
COM1
9600
-
10008
-
-
101