Sharp PN-V601 Operation Manual page 37

Background color when content is not displayed
When content is not being played, frames can be filled in using a
specified color.
Click the color swatch to display the [Color] dialog box and
change the background color.
Properties of content
From the playlist, select a content file, and click
The following settings may be adjusted:
1) Content File Path
Displays the path to the content file.
• Clicking [Attached Files] will allow you to add a file or files
from the [Attached Files] dialog box which appears.
• Clicking [Change] will allow you to change the file via the
[Open] dialog box that appears.
If using HTML content, make sure that images, movies
and other files referred to in the HTML code are
transferred to the same location, or a subdirectory of the
same location, where the HTML file itself is stored. Make
sure that all attached files referenced in the HTML file are
defined by their relative paths.
2) Duration
The duration of play can be set.
• When the content type is video, audio, or scroll message, you
can set the operation to be performed when playback of the
content is finished before the specified duration is reached.
To set this, click [Play Setting].
• When the "Scroll to the end of this message" check box is cleared, playback of scroll messages is forcibly
terminated after the specified duration is reached even if playback is not finished yet (effective when the
content type is scroll message).
• If the same content files are placed in the playlist successively, play is resumed after returning to the top of
the content files after the play time has expired.
3) Background
If the content is a still image file and you have checked the "Keeping aspect ratio" option button, you can
specify a background color for the content.
Click the color swatch to display the [Color] dialog box and change the background color.
Click the box next to "Transparent" to make the background transparent.
The background color for the background frame cannot be set to transparent.
4) Volume Control
The volume can be set.
to display the [Properties of Content] dialog box.
Program Editor
Creating programs
37