Related Manuals for Baumuller GNA 132
Summarization of Contents
Safety and Commissioning Information for Low-Voltage Machines
General
General safety advice and responsibilities for low-voltage machines.
Appropriate Use
Specifies intended use and standards compliance for the motors.
Transportation, Storage
Guidelines for safe handling, transport, and storage to prevent damage.
Long-term storage
Procedures for storing motors for extended periods, including protective measures.
Setup
Instructions for proper installation, alignment, and initial checks.
Electrical Connection
Detailed steps for safe and correct electrical wiring and connections.
Operation
Guidance on safe operation, monitoring, and periodic inspections.
Electromagnetic Compatibility
Information on meeting EMC requirements during operation.
Warranty
Conditions affecting warranty validity and reference to further details.
Information about the Product
Motor Type, Product Number and Technical Data
How to find motor identification and technical specifications.
Types of Ventilation
Describes different ventilation configurations for the motors.
Cooling
Explains cooling air flow paths and requirements for various motor types.
Necessary Cooling Air Volume and Pressure for fGN Motors
Table detailing required air volume and pressure based on motor size.
Fan Assignment for Series Motors
Lists fan types and rated currents for specific motor models.
Noise Intensity for Series Motors
Graph showing noise levels for different motor sizes at various speeds.
Operation
Instructions for Initial Commissioning
Step-by-step guide for starting up the motor for the first time.
Wiring Diagrams
Reference to separate diagrams for connecting motor, fan, and brake.
Notes
Important considerations for mounting, shaft handling, and belt drives.
Allowed Radial Forces (with Standard Motor)
Specifies permissible radial forces on the shaft, especially for horizontal mounting.
Operating Disturbances
Troubleshooting guide listing common errors, causes, and solutions.
Corrective Maintenance
Brush-Holders, Carbon Brushes and Commutator of the Main Motor
Procedures for checking and maintaining brushes, holders, and commutator.
Bearings
Recommendations for bearing maintenance, lubrication intervals, and types.
Intake opening for cooling air
Instructions for checking and cleaning the cooling air intake.
Filters
Guidance on cleaning and replacing motor filters to prevent overheating.
Need help?
Do you have a question about the GNA 132 and is the answer not in the manual?
Questions and answers