Table of Contents
Advertisement
Quick Links
17/06/2019
(https://manuals. baro.com)
Please choose page
Description and features
Description
FIBARO Walli Outlet is a smart electrical outlet designed to control electrical devices via Z-Wave network.
It measures active power and energy consumed by the controlled load.
You can install it with provided cover plate and socket cover or other compatible.
Main features
Can turn ON/OFF plugged device remotely.
Available in two versions for plug types:
Type E,
Type F.
Can be used with FIBARO Walli covers or other compatible (see "Parts compatibility"):
GIRA – System 55 (Standard 55, E2, Event, Event Clear),
Legrand – Céliane,
Schneider – Odace.
Active power and energy consumption metering.
Displays current load using multicolour LED frame (with FIBARO cover plate).
Supports Z-Wave network Security Modes: S0 with AES-123 encryption and S2 Authenticated with PRNG-
based encryption.
Works as Z-Wave signal repeater (all non-battery operated devices within the network will act as
repeaters to increase reliability of the network).
May be used with all devices certi ed with the Z-Wave Plus certi cate and should be compatible with
such devices produced by other manufacturers.
The device is a Security Enabled Z-Wave Plus product and a Security Enabled Z-Wave Controller must
be used in order to fully utilize the product.
https://manuals.fibaro.com/walli-outlet/
Walli Outlet – E/F
FGWOE-011 | FGWOF-011
Walli Outlet - E/F | FIBARO Manuals
Back To Top
1/16
Advertisement
Table of Contents
Related Manuals for FIBARO Walli Outlet F
Summarization of Contents
Description and features
Description
FIBARO Walli Outlet is a smart electrical outlet designed to control electrical devices via Z-Wave network. It measures active power and energy consumed.
Main features
Lists key functionalities and compatibility, including remote control, plug types, cover compatibility, power metering, LED frame, and security modes.
Specifications
Specifications
Details power supply, load current, active element, overcurrent protection, wires, operating temperature, ambient humidity, protocol, frequency band, transmitting power, range, dimensions, and EU compliance.
Important safety information
Important safety information
Read manual before installation. Failure to observe may be dangerous. Manufacturer not liable for damage from non-compliance.
DANGER OF ELECTROCUTION!
Warning about electrical shock risk. Device designed for home installation. Faulty connection may cause fire or electric shock.
Product Warnings and Usage Restrictions
Warnings regarding connecting other devices, intended use in dry locations, and that the product is not a toy.
Installation
Before installation
Guidelines for safe installation, including not powering before assembly, connecting according to diagram, using correct boxes, and checking parts.
Electrical connection
Steps for wiring the device, including switching off mains, connecting according to diagram, verifying, and tightening screws.
First assembly
First assembly
Steps for physically assembling the device with FIBARO covers, including mounting frame, device, and cover plate.
Changing covers
GIRA Covers
Steps for installing the device with GIRA covers, including dismounting and snapping new parts.
Legrand Covers
Steps for installing the device with Legrand covers, including frame replacement and wiring.
Schneider Covers
Steps for installing the device with Schneider covers, including frame replacement and wiring.
Parts compatibility
Parts compatibility
Lists available FIBARO parts and their inclusion for FGWOF-011 and FGWOE-011 models.
Parts required for GIRA System 55 covers
Details FIBARO parts required for GIRA System 55 covers, specifying socket types F and E.
Parts required for Legrand Céliane covers
Details FIBARO parts required for Legrand Céliane covers, specifying socket types F and E.
Parts required for Schneider Odace covers
Details FIBARO parts required for Schneider Odace covers, specifying socket types F and E.
Z-Wave network
Adding to Z-Wave network
Explains the Z-Wave device learning mode for adding devices to an existing network.
Adding manually
Provides instructions for manually adding the device to the Z-Wave network using the button.
Adding using SmartStart
Describes how to add SmartStart enabled products to a Z-Wave controller by scanning a QR code.
Removing from Z-Wave network
Removing from Z-Wave network
Explains the Z-Wave device learning mode for removing devices from an existing network, which also resets to factory defaults.
To remove the device from the Z-Wave network:
Provides step-by-step instructions for removing the device from the Z-Wave network.
Z-Wave range test
Z-Wave range test
Details how to perform a Z-Wave range test using the device's built-in tester after adding it to the controller.
Z-Wave range tester signalling modes:
Explains the visual indicators (LED colors) for different Z-Wave network communication statuses during a range test.
Operating the device
Controls
Identifies the physical controls of the device: the button and the LED ring.
Button control
Details the functions of the device's button: single click for ON/OFF, triple click for Z-Wave network actions, and press/hold for menu.
Visual indications
Explains the meaning of the built-in LED light colors for device status, updates, and menu navigation.
Menu
Describes how to access the device's menu for Z-Wave network actions and parameter settings.
Resetting to factory defaults
Resetting to factory defaults
Procedure to restore the device to its factory settings, clearing Z-Wave controller information and user configuration.
Additional features
Power and energy metering
The device allows for active power and energy consumption monitoring, sending data to the Z-Wave controller.
Resetting consumption memory
Instructions on how to reset the device's stored energy consumption memory using the button.
Configuration
Associations
Explains device associations (linking devices) for direct control within the Z-Wave system network.
Advanced parameters
Lists configurable parameters that allow customization of the device's operation via the Z-Wave controller.
Need help?
Do you have a question about the Walli Outlet F and is the answer not in the manual?
Questions and answers