Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for LEYBOLD D10E
Summarization of Contents
Description
1.1 Principle of Operation
Explains the working principle of the dual-stage rotary vane vacuum pump.
1.2 Supplied Equipment
Lists the standard components included with each TRIVAC E pump.
1.3 Accessories
Lists optional accessories available for the TRIVAC E pumps.
1.4 Technical Data
Provides key technical specifications for TRIVAC E pumps.
1.4.1 Motor Dependent Data
Details technical data specific to different motor types used in the pumps.
Operation
2.1 Installation
Guides on how to properly install the TRIVAC E vacuum pump.
2.2 Connection to the System
Instructions for connecting the pump to the vacuum system and exhaust.
2.3 Electrical Connection
Covers the electrical connection requirements for AC and three-phase motors.
2.3.1 Pumps with AC Motor
Specific electrical connection details for pumps with AC motors.
2.3.2 Pumps with Three-Phase Motor
Specific electrical connection details for pumps with three-phase motors.
2.4 Start Up
Procedures for safely starting up the TRIVAC E vacuum pump.
2.5 Operation
General operating principles for pumping gases and vapors.
2.5.1 Pumping of Non-Condensable Gases and Vapours
Guidelines for pumping permanent gases and non-condensable vapors.
2.5.2 Pumping of Condensable Gases and Vapours
Instructions for pumping condensable gases and water vapor.
2.5.3 Operating Temperature
Specifies the recommended ambient and operating temperature ranges.
2.6 Shut Down / Shelving
Procedures for safely shutting down and shelving the pump.
2.6.1 Shut Down through Monitoring Components
Details on shutdown procedures triggered by monitoring components.
2.6.2 Failure of the Control System or the Mains Power
Addresses pump behavior during control system or power failures.
Checking / Maintenance
3.1 Checking the Oil Level
Instructions on how to check and maintain the correct oil level.
3.1.1 Oil Check
Methods for checking the condition of the pump oil.
3.2 Oil Change
Step-by-step guide for changing the pump's oil.
3.2.1 Disposal of Used Pump Materials
Guidelines for the safe disposal of used pump materials and oil.
3.3 Cleaning the Dirt Trap
Procedure for cleaning the intake dirt trap to maintain pump performance.
3.4 Removing and Inserting the Internal Demister
Steps for removing and reinstalling the internal demister.
3.5 Disassembly and Assembly of the Electric Motor
Instructions for disassembling and reassembling the electric motor.
3.5.1 Instructions for the TRIVAC D5E-D 10 E
Specific disassembly and assembly steps for D5E-D10E motor.
3.5.2 Instructions for the TRIVAC D 16 E
Specific disassembly and assembly steps for D16E motor.
3.6 Full Maintenance
Guidance on performing full maintenance on the pump.
3.7 Leybold Service
Information on returning pumps for service and necessary documentation.
3.8 Shelving
Procedures for properly shelving the vacuum pump for storage.
Maintenance Plan
7 Change the oil and clean the oil level glass.
Recommended maintenance task for oil change and cleaning the oil level glass.
8 Check the pump's fan, the motor fan and the cooling fins of the motor for dirt, and clean as required.
Recommended maintenance task for cleaning the pump and motor cooling components.
9 Full maintenance
Procedure for comprehensive maintenance of the pump.
Maintenance and Repair Kits
5.1 Ordering Information for the Maintenance Kits and the Repair Sets
Catalog numbers for ordering maintenance and repair kits for TRIVAC pumps.
5.2 Ordering Information for the Special Tools
Catalog numbers for ordering special tools, like the tie rod tool.
Need help?
Do you have a question about the D10E and is the answer not in the manual?
Questions and answers