Related Manuals for Fimap SMx 75Bt
Summarization of Contents
Machine Preparation
Handling and Unpacking
Procedures for receiving and unpacking the machine from its packaging.
Battery Installation and Charging
Steps for installing, connecting, and charging the machine's batteries.
Components and Adjustments
Identification of instrument panel, rear, and side components, plus adjustments.
Solution and Brush Setup
Filling solution tank, preparing detergent, and assembling brushes.
Work
Preparing to Work
Steps to take before starting machine operation, including checks and connections.
End of Work Procedures
Steps for cleaning the machine, emptying tanks, and storing it safely after use.
Daily Maintenance
Cleaning Tanks and Filters
Procedures for cleaning the recovery tank and suction filter.
Brush and Squeegee Maintenance
Steps for cleaning the squeegee and disassembling brushes.
Weekly Maintenance
Squeegee Tube and Brake Checks
Instructions for cleaning the squeegee tube and checking the brake system.
Splash Guard and Squeegee Rubber Replacement
Guidance on replacing splash guards and squeegee rubbers.
Extraordinary Maintenance
Cleaning the Dosing System
Procedure for cleaning the FSS dosing system for long periods of non-use.
Troubleshooting
Operational Problems and Solutions
Addresses issues like insufficient water, poor cleaning, and squeegee drying.
Electrical System Protection
Details on power fuses and thermal cut-outs for motor protection.
Disposal
Machine Disposal Guidelines
Instructions for environmentally responsible disposal of the machine and its parts.
Choosing and Using the Brushes
Brush Selection Guide
Information on different brush types and how to choose the correct one for the floor.
EC Declaration of Compliance
Compliance Information
Lists directives and standards the floor scrubber-dryer complies with.
Need help?
Do you have a question about the SMx 75Bt and is the answer not in the manual?
Questions and answers