Advertisement
Quick Links
STRIDER PLATINUM SERIES
SST-ST1200-PTS
SST-ST1000-PTS
The world's smallest kilowatt-level ATX power supply
Compact design with a depth of 140mm for easy integration
High efficiency with 80 PLUS Platinum certification
100% modular cables
24/7 continuous power output with 40℃ operating temperature
Class-leading single +12V rail
Strict ±3% voltage regulation and low ripple & noise
Built-in silent & durable hybrid ceramic bearing (HYB) fan
FF122 magnetized fan filter included
Advertisement
Related Manuals for SilverStone SST-ST1000-PTS
Summarization of Contents
SPECIFICATION
1. AC INPUT
Covers AC input voltage, current, and frequency requirements for continuous operation.
2. DC OUTPUT
Details DC output voltage regulation, load ranges, and ripple specifications.
2.1 DC voltage regulation
Specifies voltage regulation parameters and tolerances for various DC outputs.
2.2 Load ranges
Defines the minimum, nominal, maximum, and peak load ranges for 1000W and 1200W models.
2.3 Output Ripple
Details the ripple and noise specifications for each DC output voltage.
2.4 Overshoot
Specifies the maximum allowable overshoot at turn on or turn off.
2.5 Efficiency
Lists efficiency and power factor at different load levels at 115Vac.
2.6 Remote ON/OFF control
Explains how the remote ON/OFF feature controls the DC outputs.
3.0 PROTECTION
3.1 Over current protection
Details current limit settings and shutdown behavior for over current conditions.
3.2 Over Temperature Protection
Describes shutdown mechanism and automatic recovery for over-temperature conditions.
3.3 Over-power protection
Specifies shutdown and latch-off behavior when output power exceeds rated limits.
3.4 Under voltage protection.
Outlines shutdown behavior when DC outputs fall below 85% of maximum value.
3.5 Over voltage protection
Defines latch-mode over voltage protection for +12V, +5V, and +3.3V outputs.
4.0 TIMING
4.1 Signal timing drawing
Illustrates the signal timing sequence for main power connector signals and rails.
4.2 Hold up time
Specifies the minimum hold-up time required after input power loss.
5. ENVIRONMENT
5.1 Operation
Defines the operating temperature and relative humidity conditions.
5.2 Shipping and Storage
Specifies the temperature and relative humidity conditions for shipping and storage.
5.3 Altitude
Lists the altitude limits for operating and storing the power supply.
6. SAFETY
6.1 Underwriters Laboratory (UL) recognition.
Mentions UL recognition and compliance with UL 60950 safety standards.
7. ELECTROMAGNETIC COMPATIBILITY (EMC)
EMC Standards Compliance
Lists various IEC, EN, FCC, and ANSI standards for electromagnetic compatibility.
8. MTBF
8.1 MTBF (mean time between failures) calculation
Details the calculation method for Mean Time Between Failures (MTBF).
9. MECHANICAL REQUIREMENTS
9.1 Physical dimension (L140mm*W150mm*H86mm)
Specifies the physical dimensions of the power supply unit.
10. POWER SUPPLY CONNECTOR OVERUSE DEFINITION
EN. Power supply connector overuse definition
Defines limits for connector usage on graphics cards and motherboards to avoid warranty voidance.
Need help?
Do you have a question about the SST-ST1000-PTS and is the answer not in the manual?
Questions and answers