Rcom ECO 10 User Manual

Rcom ECO 10 User Manual

Bird egg incubator

Advertisement

North America Sales & Service www.RcomCo.com

1. COMPOSITION

3. INCUBATION /
FUNCTION SETUP
The success of incubation may vary according to different factors.
The manufacturer and distributor are not responsible for failure of incubation of costly eggs, loss of life, property damage due to negligence of user,
remodeling, painting, modification of purpose of use or power failure. When incubating parrot or costly birds please verify the internal temperature
(adjust) before use. Please read carefully the instruction manual before use to avoid failures.
Explanation on Signs
Means Forbidden.
Means Do not disassemble.
Means Do not contact.
Means the helpful information or reference
for using the product.
1. COMPOSITION

Power-related precautions

Do not use damaged power
cord, plug or loose socket.
▶ It may cause electric
shock or fire.

Precautions on installation and use

Do not install the product in
dusty or unclean places.
▶ If the dust or any alien
substance is introduced to the
interior they may cause electric
shock or fire.
Do not block the ventilation
hole with cover.
▶ Lack of ventilation may
cause an increase in internal
temperature and result in
breakdown or fire.
Rcom Bird Egg Incubator Eco Pro Plus 10 User Manual
Direct access to LIST
(Please click on the orange boxes below.)
(1) Safety precautions / (2) Introduction on Rcom 10 / (3) Name of each part and basic composition /
(1) What is incubation room? / (2) Preparation of incubation / Start incubation / (3) APS (Assembly / Speed control /
Tube replacing / How to maintain and clean)
(1) function setup (2) Moist and ventilation during incubation / (3) Management after incubation / Dew condensation
(1) How to disassemble and clean
(1) FAQ / (2) Trouble shooting and measures / (3) Product data / Product warranty / (4) Guide on customers' damage compensation
ATTENTION: Means the errors which may produce failure of incubation, trouble or damage that
require attention.
Means the matters to obligatorily observe.
Means Please disconnect the power plug from the power source.
Means the earthing to prevent electric shock.
Please pay attention on following terms when using the product.
Do not pull the power cord to
Do not disconnect the plug
disconnect nor touch the plug
during incubation.
with wet hands.
▶ The egg may die due to
▶ It may cause electric
suspension of incubation.
shock or fire.
Please pay attention on following terms when using the product.
Do not install the product
Do not install the product in
under direct sunlight.
wet or moist places.
▶ It may cause electric
▶ If the water is introduced
shock or fire.
to the interior it may cause
electric shock or fire.
Do not have any heating
Do not place on a moving
device near the power cord.
shelf, inclinated place, unstable
▶ When the cord sheath is
place or any place with severe
melted it may cause fire or
vibration.
electric shock.
▶ Product may fall resulting
in breakdown or damage.
The vibration may reduce the
product life or cause fire.
Means the possibility of injury or material loss of equipment when the
designated instruction is not observed.
Do not focibly bend the power
plug or cord, nor put any heavy
object on them which may
cause damage.
▶ It may cause electric
shock or fire.
Avoid too cold or hot place
and do not dispose the
product near candles, mosqui
to coil, cigarette fire or any
heating equipment.
▶ It may cause fire.
Do not overturn the product.
▶ The water within the
main body may pour onto
electronics or the sight glass
may be damaged.
Ver.1.0
(1) Safety precautions
Do not connect on socket with
many extensions nor by
connecting the power plugs.
▶ It may cause fire.
Do not use any other part than
assigned ones.
▶ It may cause breakdown or
failure of incubation.
Do not let a child assemble
the product. Must be
assembled by a competent
adult.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ECO 10 and is the answer not in the manual?

Questions and answers

Summarization of Contents

COMPOSITION
Explanation on Signs
Explains the meaning of various symbols and warning signs used in the manual.
Power-related precautions
Details safety measures related to the power cord, plug, and socket.
Precautions on installation and use
Outlines important safety guidelines for setting up and using the incubator.
Precautions on cleaning
Provides essential safety instructions for cleaning the device.
Introduction on Rcom 10
Introduces the Rcom 10 incubator and its basic features.
Name of each part
Identifies and names all the main components of the incubator.
Name and function of operational parts
Describes the names and operational functions of the incubator's parts.
BEFORE USE
What is incubation room?
Describes the ideal location and environmental conditions for operating the incubator.
Explanation on Optional Functions
Details various optional functions and their settings for enhanced operation.
Preparation / Start of Incubation
Guides on how to prepare and start the incubation process with the device.
How to assemble APS (Automatic Pumping System)
Provides step-by-step instructions for assembling the Automatic Pumping System (APS).
INCUBATION / FUNCTION SETUP
How to control APS speed
Explains how to adjust the speed and volume of the APS pump for optimal humidification.
How to replace APS tube
Guides on replacing the silicone tubing for the APS unit.
How to maintain and clean APS
Provides instructions for maintaining and cleaning the APS unit and its components.
Auto Incubation
Details the process and settings for automatic incubation.
Manual Incubation
Explains how to manually set and control incubation parameters.
Start of Automatic Incubation
Describes the steps to initiate the automatic incubation process.
Starting Manual (Other birds) Incubation
Guides on setting up manual incubation for various types of birds.
Temperature setup
Instructions for setting the desired incubation temperature.
Humidity setup
Instructions for setting the desired incubation humidity level.
Cooling control cycle setup
Explains how to configure the cooling control cycle for the incubator.
Setup of number of incubation days (D-Day)
Guides on setting the total number of incubation days.
How to manually Humidify and Supply Water in Rcom PRO 10
Instructions for manually adding water for humidification in the PRO 10 model.
Termination of incubation
Describes how to properly terminate the incubation process.
Resetting incubation environment during incubation
Explains how to reset incubation parameters while the device is operating.
High/Low temperature Alarm function (optional function)
Details the optional function for high and low temperature alarms.
How to setup Abnormal High Temperature Alarm
Instructions for configuring the abnormal high temperature alarm.
How to setup Abnormal Low Temperature Alarm
Instructions for configuring the abnormal low temperature alarm.
How to switch between Celsius Fahrenheit degrees (optional function)
Explains how to switch temperature units between Celsius and Fahrenheit.
Back light ON OFF EVENT ON method (optional function)
Details how to adjust the LCD backlight settings.
How to ON-OFF Interior Lighting (optional function)
Explains how to turn the interior lighting on or off.
How to ON-OFF SOUND (optional function)
Details how to enable or disable the device's sound alerts.
Information display (optional function)
Describes how to access basic information about the device.
How to leave Optional Function
Instructions on how to exit the optional function setup menus.
PRO PLUS 10: How to forcibly operate humidifying pump
Guides on manually operating the humidifying pump for the PRO PLUS 10 model.
Candling function
Explains the purpose and procedure for using the candling function.
Humidity and ventilation control during incubation
Details how to manage humidity and ventilation for optimal incubation.
HOW TO CLEAN
How to separate and clean
Provides instructions on how to disassemble the incubator for cleaning.
PRODUCT INFORMATION
FAQ
Frequently Asked Questions section addressing common user queries.
Troubleshooting and measures
Lists common issues and their corresponding solutions for self-troubleshooting.
Specification
Provides detailed technical specifications of the Rcom 10 incubator.
Guide on Customers' Damage Compensation
Outlines the company's policy on damage compensation and warranty.

Table of Contents

Save PDF