Related Manuals for Allied Telesis AT-FS710/8
Summarization of Contents
Electrical Safety and Emissions Standards
Federal Communications Commission Interference Statement
FCC Class A compliance notice for radio frequency interference.
Declaration of Conformity (Class A)
Manufacturer's declaration for Class A compliance.
Industry Canada Compliance
Compliance with Canadian ICES-003 standard.
European Union RoHS Compliance
Conformance to EU Restriction of Hazardous Substances in electrical equipment.
Declaration of Conformity (Class B)
FCC Compliance for Class B Devices
Explains FCC Part 15 Class B compliance for residential environments.
Radiation Exposure Statement
Statement regarding FCC radiation exposure limits for uncontrolled environments.
European Union RoHS Compliance
Conformance to EU Restriction of Hazardous Substances.
Safety and Electromagnetic Emissions Certificates
EMI Certifications
Lists Electromagnetic Interference certifications including FCC, VCCI, and EN standards.
Safety Certificates
Lists safety certifications including UL, CSA, and EN standards.
Translated Safety Statements
Information on accessing translated safety statements for various regions.
Preface
Safety Symbols Used in this Document
Explains document conventions and safety symbols used throughout the manual.
Contacting Allied Telesis
Provides contact information and support resources for assistance.
Chapter 1: Product Description
Overview
General introduction to the FS710 Series Fast Ethernet Unmanaged Switches.
Front and Rear Panels
Describes the layout and components of the front and rear panels of the switches.
Key Features
Lists the main features and capabilities of the FS710 Series switches.
Ethernet Cable Specifications
Specifies the requirements and distances for twisted pair Ethernet cables.
Wall and Rack Mount Bracket Summary
Details options for mounting switches on walls or in equipment racks.
Ethernet Switching Basics
Explains fundamental Ethernet switching concepts like duplex mode and flow control.
Chapter 2: Installation
Reviewing Safety Precautions
Important safety procedures and warnings to follow before installation.
Selecting a Site for the Switch
Guidelines for choosing a suitable and safe installation location for the switch.
Unpacking the Switch
Steps for unpacking the switch and verifying all included hardware components.
Installing the Switch on a Table or Desktop
Procedure for placing and securing the switch on a flat surface like a table or desktop.
AT-FS710/5 & 5E Wall Installation
Instructions for wall mounting AT-FS710/5 and AT-FS710/5E models.
AT-FS710/8 & 8E Wall Installation
Instructions for wall mounting AT-FS710/8 and AT-FS710/8E models using a specific kit.
AT-FS710/16, /16E & /24 Wall Installation
Instructions for wall mounting AT-FS710/16, /16E, and /24 models.
Rack Mounting the Switch
General guide and considerations for rack mounting FS710 Series switches.
AT-FS710/8 & 8E Rack Mounting Installation
Steps for rack mounting AT-FS710/8 and AT-FS710/8E models using the AT-RKMT-J08 kit.
AT-FS710/16, /16E & /24 Rack Mounting Installation
Steps for rack mounting AT-FS710/16, /16E, and /24 models.
Powering On the Switch
Procedures for connecting power supply to the switch, including internal and external models.
Cabling the Switch
Instructions for connecting twisted pair Ethernet cables to the switch ports.
Appendix A: Technical Specifications
Physical Specifications
Details physical dimensions and weight of the FS710 Series switches.
Environmental Specifications
Lists operating and storage environmental conditions for the switches.
Chassis Power Specifications
Specifies the input power ratings and frequencies for the switch chassis models.
External Power Adapter Specifications
Details the specifications for the AC/DC power adapter used with certain models.
RJ-45 Twisted Pair Port Connectors
Explains the pinouts and signals for RJ-45 connectors on the switch ports.
Need help?
Do you have a question about the AT-FS710/8 and is the answer not in the manual?
Questions and answers