Related Manuals for Krone AM 283 CV
Summarization of Contents
I. Foreword
Ordering Replacement Parts
Guidance on how to order spare parts to ensure proper maintenance and longevity.
III. General
1. Operation in Accordance with Specifications
Defines the intended agricultural use of the disc mower and manufacturer's liability.
2. Safety and Accident Prevention Regulations
Comprehensive safety rules and accident prevention measures for operating the mower.
3. Attached Equipment
Procedures and safety considerations for attaching implements to the tractor.
4. Power Take-Off shaft Operation
Safe operation and handling procedures for the power take-off (PTO) shaft.
5. Hydraulic System
Information and safety precautions regarding the hydraulic system connections and operation.
6. Maintenance
General guidelines and safety for performing maintenance and repair work on the mower.
1. Introduction
1.1 Position of Warning Signs
Details the location and meaning of safety and technical information labels on the mower.
1.2 Positions of General Information Labels
Indicates the placement of general information labels for reference and identification.
1.3 Technical Data
Provides key specifications, dimensions, and performance data for the disc mower models.
2. Preparing for Operation
2.1 Attaching the Disc Mower to the Tractor
Instructions on how to correctly attach the disc mower to the tractor's hitch system.
2.2 P.T.O. Shaft
Procedures for fitting, removing, and safely operating the PTO drive shaft.
2.3 Jack Stand
Information on retracting the jack stand when the mower is in operating position.
2.4 Conditioner Drive Adjustment
How to adjust the rotation speed of the conditioner rotor via the gearbox.
2.5 Mower Angle Adjustment
Adjusting the angle of the mower relative to the tractor using the breakaway safety unit.
2.6 Preparing to Turn
Simple steps for preparing the mower for turning maneuvers.
2.7 Transport Position
Securing the mower unit in the transport position for safe road travel.
2.8 Detaching the Disc Mower
Step-by-step instructions for safely detaching the disc mower from the tractor.
2.9 Safety Measures Before Operation
Critical safety checks and precautions to perform before starting mower operation.
3. Adjusting the Disc Mower and Blades
3.1 Top Link Arm Coupling Point
Setting the coupling point of the top link arm for proper mower positioning.
3.2 Safety Breakaway Unit Adjustment
Adjusting the spring tension of the breakaway unit to protect against obstacles.
3.3 Compensating Spring Adjustment
Adjusting the cutterbar's ground pressure compensation springs for terrain conditions.
3.4 Lifting Cylinder and Flotation Spring Adjustment
Correctly positioning the lifting cylinder and flotation spring components.
3.5 Tractor Lower Link Arm Setting
Setting the tractor's lower link arm for optimal working height and ground adaptation.
3.6 Swath Width Adjustment
Adjusting the swath deflector plates to control the spread of cut crops.
3.7 Cutting Height Adjustment
Adjusting the mower's cutting height using a crank and inclinometer.
3.8 Changing Cutting Blades
Procedures for safely replacing worn or damaged cutting blades.
3.9 Conditioner Speed Adjustment
Adjusting the conditioner rotor speed for different crop types and conditions.
3.10 Conditioner Cover Plate Adjustment
Adjusting the cover plate to modify the degree of crop conditioning.
3.11 Conditioner Rotor Position
Adjusting the conditioner rotor's position relative to the cutterbar.
4. Maintenance
4.1 General Maintenance Rules
Essential safety precautions and general rules before performing any maintenance.
4.2 Cutterbar Oil Check and Change
Procedures for checking and changing the lubricating oil in the cutterbar.
4.3 Main Gearbox Oil Check and Change
Procedures for checking and changing the oil in the main gearbox.
4.4 Mower and Conditioner Drive Oil
Checking and changing the oil for the mower and conditioner drive gearboxes.
4.5 1000 RPM PTO Gearbox Oil
Oil level check and change procedures for the 1000 RPM PTO gearbox.
4.6 Overload Coupling Unlocking
How to unlock the overload coupling on the drive shafts after periods of non-use.
4.7 Overload Clutch Preparation
Steps to prepare the overload clutch for operational use.
4.8 Overload Clutch Bleeding
Procedure for bleeding the overload clutch on drive shafts to prevent sticking.
4.9 Lubrication
Lubrication points and intervals for PTO shafts and other moving parts.
Lubrication Plan
Visual guide detailing lubrication points and recommended operating hours for service.
5. Conditioner and Protective Cloth Covers
Conditioner Component Care
Inspecting and maintaining the conditioner shaft, tines, and cover plate settings.
Protective Cloth Cover Inspection
Regular checks and replacement of worn or damaged protective cloth covers.
Appendix
1. Changing Cutter Blades with Quick-Release
Specific instructions for changing blades on discs equipped with quick-release mechanisms.
Supplement to Operating Instructions
1. Assembly Instructions
Step-by-step guide for assembling the KRONE disc mowers.
Need help?
Do you have a question about the AM 283 CV and is the answer not in the manual?
Questions and answers