Advertisement
Table of Contents
- 1 Product Registration
- 2 Placement and Maintenance
- 3 Step 1
- 4 Step 3 - Adhere Bumpers H4 as Shown.
- 5 Step 4 - Open Top Drawer. Attach Glass Panel to Cabinet Using Screws H3 and Tighten with Hex Wrench.
- 6 Step 5 - Attach Pulls Using Screws H2 and Tighten with Phillips Screwdriver.
- 7 Step 5 - File Bar Installation (Letter File)
- 8 Step 6 - Legal File Accommodation
- Download this manual
See also:
Owner's Manual
CENTRO
3-DRAWER FILE CABINET
Product Registration
Registering your new BDI product allows us to send you important
product updates, service information and helpful hints related to your
BDI products. Register today, and you will be entered to win free a BINK
table from BDI. www.bdiusa.com/product-registration/
Placement and Maintenance
Centro ™ Office furniture is designed for indoor use on level floors. Clean
glass with glass cleaner, and steel parts and wood veneer with a moist
cloth.
Your Centro ™ Office furniture is engineered for easy assembly. Carefully
follow this procedure to prevent any damage.
Do not use power tools for assembly of this product.
Step 1
Unpack and identify the parts listed below. The assembly workspace
should be a non-marring surface such as carpet. For missing hardware
pieces, please contact BDI Customer Service at customerservice@
bdiusa.com. For all other concerns, please contact your BDI retailer.
Designed by Matthew Weatherly.
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Centro & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2015, BDI
Made in China. 02.16.2016 V2
6414
TM
C1 Glass Panel x 1
A1 Cabinet x 1
C3 Base x 2
bdiusa.com
customerservice@bdiusa.com
T1 4mm Hex Wrench
H1 1/4-20 x 15mm
Screw x 16
H2 M4 x 37mm
Screw x 6
H3 1/4-20 x 19mm
Screw x 3
H4 Bumper x 2
C2 Pull x 3
C4 Small File Bar x 1
C6 File Bar Clip x 2
Tool Required:
Phillips screwdriver
Advertisement
Table of Contents
Related Manuals for BDI 6414
Summarization of Contents
Product Information and Setup
Product Registration
Register your new BDI product for updates, service information, and entry to win a BINK table.
Placement and Maintenance
Instructions for placing the furniture on level floors and cleaning glass, steel, and wood veneer.
Assembly Instructions
Step 1: Unpack and Identify Parts
Unpack all components and identify them using the provided list before starting assembly.
Step 2: Attach Base to Cabinet
Lay the cabinet on its back and attach the base using screws and the hex wrench.
Step 3: Adhere Bumpers
Attach the provided bumpers to the designated locations on the cabinet top.
Step 4: Attach Glass Panel
Open the top drawer and secure the glass panel to the cabinet using screws and the hex wrench.
Step 5: Attach Drawer Pulls
Install the drawer pulls onto the cabinet drawers using the provided screws and a Phillips screwdriver.
Step 5: File Bar Installation (Letter File)
Install file bar clips and bars for letter files in the drawers, or skip for front-facing files.
Step 6: Legal File Accommodation
Instructions for configuring the drawers to accommodate legal-sized files.
Need help?
Do you have a question about the 6414 and is the answer not in the manual?
Questions and answers