BDI CENTRO 6402 Manual

CENTRO
RETURN
Product Registration
Registering your new BDI product allows us to send you
important product updates, service information and helpful
hints related to your BDI products. Register today and you will
be entered to win free a BINK table from BDI. www.bdiusa.
com/product-registration/
Placement and Maintenance
Centro ™ Office furniture is designed for indoor use on level
floors. Clean glass with glass cleaner, and steel parts and
wood veneer with a moist cloth.
Your Centro ™ Office furniture is engineered for easy assembly.
Carefully follow this procedure to prevent any damage.
Do not use power tools for assembly of this product.
Step 1
Unpack and identify the parts listed below. The assembly
workspace should be a non-marring surface such as carpet.
For missing hardware pieces, please contact BDI Customer
Service at customerservice@bdiusa.com. For all other
concerns, please contact your BDI retailer.
-
C3
Leg x 1
Designed by Matthew Weatherly.
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Centro & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2015, BDI
Made in Taiwan. 01.08.2016 V1
6402
TM
C1 - Glass Panel x 1
C2 - Frame Assembly x 1
bdiusa.com
customerservice@bdiusa.com
T1 4mm Hex Wrench
H6 1/4-20 x 12 mm Screw x 2
H7 1/4-20 x 38 mm Screw x 4
H8 1/4-20 x 61 mm Screw x 4
H19 Leveler Glide x 2
H11 Cord Wrap x 3
H12 - Snap Fastener x 3
H13 Bumper x 2