McAfee VIRUSSCAN 5.1 Administrator's Manual page 73

4. Press CTRL+A to add files to the new archive.
The Add dialog box appears.
5. Click Password to display the Password dialog box.
6. Type INFECTED in the Password text box, then click OK.
7. When prompted, retype your password to verify its accuracy, then click
OK.
The Add With Password dialog box appears.
8. Select your sample files, then click OK.
WinZip applies the password you entered to all files that you add to or
extract from your archive. Password-protected files appear in the archive
list with a plus sign (+) after their names.
Š NOTE: If you do not protect your samples with the password
INFECTED, McAfee VirusScan's anti-virus scanners may detect and
clean samples before they reach our researchers.
9. Attach the .ZIP file that you created to an e-mail message.
Sending samples via e-mail
Once you've made disk images or created a file archive for your samples, send
them to McAfee VirusScan researchers at one of these e-mail addresses:
In the United States
In the United Kingdom
In Germany
In Japan
In Australia
In the Netherlands
In South Africa
In your message, include this information:
• Which symptoms cause you to suspect that your machine is infected
• Which product and version number detected the virus, if any did, and
what the results were
• Your VirusScan and .DAT file version numbers
Removing Infections From Your System
virus_research@nai.com
vsample@nai.com
virus_research_de@nai.com
virus_research_japan@nai.com
virus_research_apac@nai.com
virus_research_europe@nai.com
virus_research_sa@nai.com
Administrator's Guide 73