McAfee VIRUSSCAN 5.1 Administrator's Manual page 34

Installing VirusScan Software
11. Choose the VirusScan components you want to install. You can:
12. When you have chosen the components you want to install, click Next>
34 McAfee VirusScan
Figure 2-6. Custom Setup panel
• Add a component to the installation. Click
component name, then choose
local hard drive from the menu that appears. To add a component
and any related modules within the component, choose
This feature, and all subfeatures, will be installed on local
hard drive instead. You can choose this option only if a component
has related modules.
• Remove a component from the installation. Click
component name, then choose
available from the menu that appears.
Š NOTE: The VirusScan Setup utility does not support the other
options shown in this menu. You may not install VirusScan
components to run from a network, and VirusScan software
has no components that you can install on an as-needed basis.
You can also specify a different disk and destination directory for the
installation. Click Change, then locate the drive or directory you want to
use in the dialog box that appears. To see a summary of VirusScan disk
usage requirements relative to your available hard disk space, click Disk
Usage. The wizard will highlight disks that have insufficient space.
to continue.
beside a
This feature will be installed on
This feature will not be
beside a