McAfee VIRUSSCAN 5.1 Administrator's Manual page 113

Table C-1. VirusScan command-line scanner options
/NODDA
/NODISK
/NODOC
/NOEMS
/NOEXPIRE
/NOMEM
/NOREMOVE
/NOWARMBOOT
/NOXMS
/ONLY <drive(s)>
/PANALYZE
On-demand No direct disk access. This prevents the scanner
scanning only from examining the boot record.
This feature has been added to allow the scanner
to run under Windows NT.
You might need to use this option on some
device-driven drives.
Using /NODDA with the /ADN or /ADL switches
may generate errors when accessing empty
CD-ROM drives or empty Zip drives. If this occurs,
type F (for Fail) in response to the error messages
to continue the scan.
On-access Does not scan boot sector while loading the
scanning only VShield scanner.
On-demand Does not scan Microsoft Office files.
scanning only
On-access Keeps the VShield scanner from using extended
scanning only memory (XMS).
On-demand Disables the "expiration date" message if the
scanning only VirusScan data files are out of date.
None Does not scan memory for viruses.
This greatly reduces scan time.
Use /NOMEM only when you are absolutely
certain that your computer is virus-free.
On-access Prevents users from removing the VShield scanner
scanning only from memory with the /REMOVE switch.
On-access Does not check the disk boot sector of the floppy
scanning only disk in drive A: for viruses during warm boot
(system reset or
On-access Does not use extended memory (XMS).
scanning only
On-access Checks only files loaded from the specified
scanning only drive(s).
On-demand Sets the VirusScan scanner to use program
scanning only heuristics.
Extended /MANALYZE targets macro viruses only;
memory
/ANALYZE targets both program and macro
required
viruses.
Using VirusScan Command-line Options
+ + ).
CTRL ALT DEL
Administrator's Guide 113