Specifications - Denon AVR-2308 Owner's Manual

ENGLISH

Specifications

n
Audio section
• Power amplifier
Rated output:
Dynamic power:
Output terminals:
• Analog
Input sensitivity / Input impedance:
Frequency response:
S/N:
Distortion:
Rated output:
• Phono equalizer (PHONO input — REC OUT)
Input sensitivity:
RIAA deviation:
S/N:
Rated output:
Distortion factor:
n
Video section
• Standard video terminals
Input / output level and impedance:
Frequency response:
• S-Video terminals
Input / output level and impedance:
Frequency response:
• Color component video terminal
Input / output level and impedance:
Frequency response:
0
Front (A, B):
100 W + 100 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
135 W + 135 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Center:
100 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
135 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Surround:
100 W + 100 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
135 W + 135 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Surround Back:
100 W + 100 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
135 W + 135 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
120 W x 2ch (8 Ω/ohms)
170 W x 2ch (4 Ω/ohms)
Front: A or B 16 ~ 16 Ω/ohms
A + B 12 ~ 16 Ω/ohms
Center, Surround, Surround Back: 16 ~ 16 Ω/ohms
200 mV / 47 kΩ/kohms
10 Hz ~ 100 kHz — +1,–3 dB (DIRECT mode)
100 dB (IHF-A weighted) (DIRECT mode)
0.008 % (20 Hz ~ 20 kHz) (DIRECT mode)
1.2 V
2.5 mV
±1 dB (20 Hz to 20 kHz)
74 dB (A weighting, with 5 mV input)
150 mV
0.03 % (1 kHz, 3 V)
1 Vp-p, 75 Ω/ohms
5 Hz ~ 10 MHz — +0, –3 dB (when video convert set to "OFF")
Y (brightness) signal — 1 Vp-p, 75 Ω/ohms
C (color) signal — 0.3 (PAL) / 0.286 (NTSC) Vp-p, 75 Ω/ohms
5 Hz ~ 10 MHz — +0, –3 dB (when video convert set to "OFF")
Y (brightness) signal — 1 Vp-p, 75 Ω/ohms
P / C signal — 0.7 Vp-p, 75 Ω/ohms
B B
P / C signal — 0.7 Vp-p, 75 Ω/ohms
R R
5 Hz ~ 100 MHz — +0, –3 dB (when video convert set to "OFF")
n
Tuner section
(note: µV at 75 Ω/ohms, 0 dBf = 1 x 10
Receiving Range: 87 .5 MHz ~ 108.0 MHz
Usable Sensitivity: 1.0 µV (11.2 dBf)
50 dB Quieting Sensitivity: MONO
STEREO 23 µV (38.5 dBf)
S/N (IHF-A): MONO
STEREO 72 dB (IHF-A weighted)
Total harmonic Distortion (at 1 kHz): MONO
STEREO 0.3 %
n
General
Power supply: AC 230 V, 50 Hz
Power consumption: 450 W
0.3 W (Standby)
434 (W) x 171 (H) x 420 (D) mm
Maximum external dimensions:
Weight: 12.8 kg
n
Remote control unit (RC-1081)
Batteries: R6P/AA Type (two batteries)
Maximum external dimensions: 52 (W) x 243 (H) x 21 (D) mm
Weight: 184 g (including batteries)
z For purposes of improvement, specifications and design are subject to change without notice.
[FM] [AM]
W)
-15
522 kHz ~ 1611 kHz
18 µV
1.6 µV (15.3 dBf)
77 dB (IHF-A weighted)
0.15 %