Multi-Zone Operations; Turning The Power On And Off; Selecting The Input Source; Adjusting The Volume - Denon AVR-2308 Owner's Manual

ENGLISH
SOURCE SELECT
<ZONE2 ON/OFF>
[Front]
SOURCE SELECT
[MODE
SELECTOR 1]
[Rear]
[ZONE2 ON]
[ZONE2 OFF]
SOURCE SELECT
About the button names in these explanations
< >
: Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit


Multi-zone Operations

VOLUME

Turning the Power On and Off

GOperation on the main unitH
Press <ZONE2 ON/OFF> for the zone to be operated.
When the power turns on, the multi-zone indicator (
the display.
GOperation on the remote control unitH
Set [MODE SELECTOR 1] to "AUDIO" and [MODE SELECTOR 2] to
"ZONE2" .
Press [ZONE2 ON] or [ZONE2 OFF].
When using ZONE2, it is possible to turn the power for the MAIN
ZONE only on or off by pressing [MAIN ON] or [MAIN OFF].

Selecting the Input Source

GOperation on the main unitH
VOLUME
Turn <SOURCE SELECT>.
[MUTING]
GOperation on the remote control unitH
Set [MODE SELECTOR 1] to "AUDIO" and [MODE SELECTOR 2] to
"ZONE2" .
Press [SOURCE SELECT].
[MODE
SELECTOR 2]
[MAIN OFF]
[MAIN ON]

Adjusting the Volume

GOperation on the main unitH
Turn <VOLUME> to adjust.
GOperation on the remote control unitH
Set [MODE SELECTOR 1] to "AUDIO" and [MODE SELECTOR 2] to
"ZONE2" .
) lights on
Press [VOLUME].
[Variable range] – – – –70dB ~ –40dB ~ +18dB
• The volume can be increased up to the value set at menu "Manual
Setup" – "Zone2 Setup" – "Volume Limit" (vpage 29).
• The ZONE2 volume can be adjusted only when "ZONE2" is selected
at menu "Manual Setup" – "Option Setup" – "Amp Assign" (vpage
30).

Turning off the Sound Temporarily

Press [MUTING].
The sound is reduced to the level set at menu "Manual Setup" –
"Zone2 Setup" – "Mute Level" (vpage 29).
To cancel, either adjust the volume or press [MUTING] again.
The setting is canceled when the zone's power is turned off.
The source selected for ZONE2 is also output from the recording
output connectors.
NOTE
Digital audio signals input from the COAXIAL or OPTICAL connectors
cannot be played in multi-zone.