Playing Video And Audio Equipment; Basic Operation; Listening To Fm/Am Broadcasts - Denon AVR-2308 Owner's Manual

ENGLISH
TUNING
SOURCE SELECT SHIFT
BAND
PRESET CHANNEL
[Front]
SHIFT
SOURCE SELECT
[MODE
SELECTOR 1]
[Rear]
SOURCE SELECT
TUNING
[MODE]
[MEMORY]
About the button names in these explanations
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit


Playing Video and Audio Equipment

<PTY> <RT>

Basic Operation

1
Prepare the equipment.
q Load the DVD, CD or other software in the player.
(vSee the operating instructions of the respective devices.)
w To play a video device, switch the monitor input.
(vSee the monitor's operating instructions.)
2
SOURCE SELECT
Use
<RDS>
3
[MODE SELECTOR 1]
Set
(vpage 51 "Remote Control Unit Operations")
4
[MODE SELECTOR 2]
Set
PRESET
to operate.
CHANNEL
5
Start playback.
(vSee the operating instructions of the respective devices.)
[MODE
SELECTOR 2]
[TUNER]
BAND

Listening to FM/AM Broadcasts

Basic Operation
1
2
3
to select the input source.
4
to "AUDIO" or "VIDEO".
q To tune in automatically (Auto Tuning)
Press [MODE] to light the "AUTO" indicator on the display, then use
to the component you want
TUNING to select the station you want to hear.
w To tune in manually (Manual Tuning)
Press [MODE] to turn off the display's "AUTO" indicator, then use
TUNING to select the station you want to hear.
• It is also possible to switch to "FM" or "AM" in step 1 by pressing
[TUNER].
• If the desired station cannot be tuned in with auto tuning, tune it in
manually.
• When tuning in stations manually, press and hold TUNING to change
frequencies continuously.
• The time for which the on-screen display are displayed can be set at
"Manual Setup" – "Option Setup" – "On-Screen Display" (vpage
31).
<SOURCE SELECT>
Either turn or press
select "TUNER".
[MODE SELECTOR 1]
Set to "AUDIO".
(vpage 51 "Remote Control Unit Operations")
BAND
Press to select "FM" or "AM".
Tune in the desired broadcast station.
[TUNER]
to