Manual Setup; Speaker Setup; Speaker Configuration; Subwoofer Setup - Denon AVR-2308 Owner's Manual

Manual Setup

Make detail settings for various parameters.

Speaker Setup

Use this procedure to set the speakers manually or if you wish to
change the settings made with the auto setup procedure.
F Menu screen F
MENU
2.Manual Setup
1.Auto Setup
2.Manual Setup
1.Speaker Setup
3.Input Setup
2.HDMI Setup
4.Parameter
3.Audio Setup
5.Information
4.Zone2 Setup
5.Option Setup
a Speaker Configuration
Select speaker configuration and size.
(bass reproduction capability)
Front Speaker
Select front speaker size.
[Selectable items] Large Small
Center Speaker
Select center speaker use and size.
[Selectable items] Large Small None
Subwoofer
Select subwoofer use.
[Selectable items] Yes No
Surround Speaker
Select surround speakers use and size.
[Selectable items] Large Small None
Surround Back Speaker
Select surround back speaker use and size.
[Selectable items] Large Small None
2spkrs 1spkr
Large
: Select this when using large speakers with ample low
frequency reproduction capabilities.
Small
: Select this when using small speakers without ample low
frequency reproduction capabilities.
None
: Select this when no speaker is connected.
Yes
: Select this when a subwoofer is connected.
No
: Select this when no subwoofer is connected.
2spkrs 1spkr
:
Select the number of surround back speakers.
• Select "Large" or "Small" not according to the physical size of the
speaker but according to the low frequency reproduction capabilities
based on the frequency set at "Crossover Frequency" (vpage
26).
• When "Front Speaker" is set to "Small" , "Subwoofer" is automatically
set to "Yes" .
• If "Subwoofer" is set to "No" , "Front Speaker" is automatically set to
"Large" .
• If "Surround Speaker" is set to "None" , "Surround Back Speaker" are
automatically set to "None" .
• When using just one surround back speaker, connect it to the left
channel (SBL).
s Subwoofer Setup
Select low range signal to be reproduced by subwoofer.
[Selectable items]
LFE
: Play low range and LFE signal of channels set to
"Small" .
LFE+Main
: Play low range and LFE signal of all channels.
• This can be set when menu "Speaker Configuration" – "Subwoofer"
is set to "Yes" .
• Play music or a movie source and select the mode offering the
strongest bass.
• Select "LFE+Main" if you want the bass signals to always be
produced from the subwoofer.
d Distance
Set distance from listening position to speakers.
Before making the settings, measure the distance from the
listening position to the different speakers.
Meters / Feet
Select unit for distance.
Step
Select step. (smallest distance)
[Selectable items]
0.01m
0.1m
: Can be selected when "Meters" is set.
1ft 0.1ft
: Can be selected when "Feet" is set.
Default
Resets the settings to the default values.
ENGLISH