McAfee DR SOLOMON S ANTI-VIRUS 8.5 Administrator's Manual page 173

Table C-1. Dr Solomon's Anti-Virus command-line scanner options
/NODDA
/NODISK
/NODOC
/NOEMS
/NOEXPIRE
/NOMEM
/NOREMOVE
/NOWARMBOOT
/NOXMS
/ONLY <drive(s)>
/PANALYZE
Using Dr Solomon's Anti-Virus Command-line Options
On-demand No direct disk access. This prevents the scanner
scanning only from examining the boot record.
This feature has been added to allow the scanner
to run under Windows NT.
You might need to use this option on some
device-driven drives.
Using /NODDA with the /ADN or /ADL switches
may generate errors when accessing empty
CD-ROM drives or empty Zip drives. If this occurs,
type F (for Fail) in response to the error messages
to continue the scan.
On-access Does not scan boot sector while loading the
scanning only WinGuard scanner.
On-demand Does not scan Microsoft Office files.
scanning only
On-access Keeps the WinGuard scanner from using extended
scanning only memory (XMS).
On-demand Disables the "expiration date" message if the Dr
scanning only Solomon's Anti-Virus data files are out of date.
None Does not scan memory for viruses.
This greatly reduces scan time.
Use /NOMEM only when you are absolutely
certain that your computer is virus-free.
On-access Prevents users from removing the WinGuard
scanning only scanner from memory with the /REMOVE switch.
On-access Does not check the disk boot sector of the floppy
scanning only disk in drive A: for viruses during warm boot
(system reset or
On-access Does not use extended memory (XMS).
scanning only
On-access Checks only files loaded from the specified
scanning only drive(s).
On-demand Sets the Dr Solomon's Anti-Virus scanner to use
scanning only program heuristics.
Extended /MANALYZE targets macro viruses only;
memory
/ANALYZE targets both program and macro
required
viruses.
+ + ).
CTRL ALT DEL
Administrator's Guide 173