Unsupported Paper Types
This section lists the paper types that are not supported by the Folding Finisher.
Important
• Do not use the following types of paper. Doing so may cause malfunctions.
• Heavily curled paper
• Thick paper
• Paper with staples
• Torn paper
• Paper with holes
• Very rough paper
• Very smooth paper
• Thin and soft paper
• Release paper
• Paper with penciled characters or images
• Folded paper
Note
❒ Even supported types of paper may cause paper jams or malfunctions if the
paper is not in good condition.
Notations for Standard Paper Sizes
In this manual, the following notations are used to show paper sizes.
Notation
E
D
C
B
A
Note
❒ Paper sizes are set to Architecture settings by default. Select Architecture or
Engineering depending on the paper size that you want to use. For details, see
"Changing the Folding Finisher Settings".
Reference
p.39 "Changing the Folding Finisher Settings"
Paper size (Width × Length)
Architecture
36" × 48"
24" × 36"
18" × 24"
12" × 18"
9" × 12"
Engineering
34" × 44"
34" × 22"
17" × 22"
11" × 17"
" × 11"
1
8
/
2
Paper
1
15