Preparation Before Using The Folding Finisher; Switching The Folding Finisher Between On And Standby; Turning The Folding Finisher On - Ricoh Aficio MP W3600 Operating Instructions Manual

1. Preparation Before Using
Switching the Folding Finisher Between On
and Standby
This section explains how to turn the Folding Finisher on, and how to set it to
standby.

Turning the Folding Finisher On

This section explains how to turn on the Folding Finisher.
A
Turn the power switch of the Folding Finisher to "aOn".
B
Turn on the power switch of the printer.
Note
❒ Turn on the Folding Finisher before turning on the printer. Otherwise, the
printer will not recognize the Folding Finisher.
❒ If the printer does not recognize the Folding Finisher when they were
turned on in the correct order, check that the cable connecting them is firmly
attached at each end.
the Folding Finisher
ATR002S
ATR005S
9