Guide To The Folding Finisher - Ricoh Aficio MP W3600 Operating Instructions Manual

Guide to the Folding Finisher

This section lists the names and functions of the parts of the Folding Finisher.
1.
Control panel (Option)
The folding type and other settings can
be configured using the keys here, and
the condition of the Folding Finisher is
shown on the display.
2.
Paper Feed Table (Option)
Place the paper on this table when using
the Folding Finisher independently from
the printer. For details, see "Placing Paper
on the Paper Feed Table".
3.
Folding Guide (Option)
Use this guide when folding paper by
hand. For details, see "When Folding Paper
by Hand".
4.
Paper Guide (Option)
Adjust this guide when placing paper on
the Paper Feed Table.
5.
Power switch
Use this switch to turn the Folding Finisher
on, or set it to standby. When operating the
Folding Finisher and printer together, you
must turn on the Folding Finisher first. For
details, see "Switching the Folding Finisher
Between On and Standby".
4
6.
Paper Exit
Fan-folded paper is output here.
7.
Paper Exit Tray
Paper output from the Paper Exit is
stacked here. This tray can hold only one
sheet of paper at a time. Extend this tray
before use.
8.
Non-folded Paper Exit Tray
Paper output from the Non-folded Paper
Exit is stacked here. Up to 10 sheets can
be stacked when using D size paper.
For paper size notations, see "Notations
for Standard Paper Sizes".
9.
Non-folded Paper Exit
Non-folded paper is output here.
10.
Anti-humidity Heater switch
When humidity is high, turn this switch
to "aON" to dry paper. For details, see
"Operating the Anti-humidity Heater
Switch".
ATS038S