Windows Configuration
Troubleshooting for using USB
1
The machine is not automatically
recognized.
Windows has already configured the
USB settings.
30
Problems
Solutions
Turn off the power of the machine, reconnect the USB
cable, and then turn it on again.
Open Windows' Device Manager, and then, under [Uni-
versal Serial Bus controllers], remove any conflicting de-
vices. Conflicting devices have a yellow [!] or [?] icon by
them. Take care not to accidentally remove required de-
vices. For details, see Windows Help.
Note
❒ When using Windows 2000 / XP or Windows Server
2003, an erroneous device is displayed under [USB
Controller] in the [Device Manager] dialog box.