SO-DIMM (memory module)
The printers have 32 MB of standard memory and one slot for optional memory expansion. You can expand
the memory up to 544 MB by installing dual in-line memory modules (SO-DIMMs).
SO-DIMM types
In general, the machine uses industry-standard SO-DIMM with the following specifications:
Type: 144 pin and 64 bit output
CAS latency: 2
Clock frequency: 100 MHz or more
Capacity: 64, 128, 256 or 512 MB
Height: 31.75 mm (1.25 in.)
Dram Type: SDRAM 2 Bank
SDRAM can be used.
For purchasing information and part numbers visit the Buffalo Technology website:
http://www.buffalo-technology.com/
Note
• There might be some SO-DIMMs that will not work with the printer.
• For more information, call the dealer you bought the printer from or KONICA MINOLTA Customer
Service.
Options
5
5
5
85