Dual In-Line Memory Module (Dimm); Installing A Dimm - Konica Minolta magicolor 4750EN/4750DN User Manual

Dual In-Line Memory Module (DIMM)

You may need additional memory (DIMM) for complex graphics and
for duplex (double-sided) printing.
Dual in-line memory module (or DIMM) is compact circuit board with sur-
face-mount memory chips.
There is 256 MB of onboard memory and one available memory expansion
slot. The memory can be expanded to a maximum of 768 MB (256 MB + 512
MB).

Installing a DIMM

Note
It's very important to protect the printer controller board and any
associated circuit boards from electrostatic damage. Before performing
this procedure, review the antistatic caution on page 10-3. In addition,
always handle circuit boards by the edges only.
1
Turn off the printer and discon-
nect the power cord and inter-
face cables.
2
Using a screwdriver, remove two
screws.
10-4 Dual In-Line Memory Module (DIMM)