Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Jadever 3K
Summarization of Contents
Before Using the Product
Unpacking and Checking
Instructions for unpacking the scale and checking for transport damage or missing parts.
Installing Components
Guidance on removing the shipping protection screw and fitting the weighing pans.
Leveling the Scale
Procedure for leveling the scale using the front panel indicator and leveling feet.
Product Introduction
Specifications & General Features
Details on scale models, capacity, divisions, display, dimensions, power, and general features.
Display
Explanation of the JWL weighing scale display elements.
Keyboard
Overview of the scale's keyboard layout.
Power Supply
Information on AC power supply and built-in rechargeable battery.
Operation
Weighing
Procedure for performing basic weighing operations on the scale.
Manual Tare & Preset Tare
Instructions for manual and preset tare functions to exclude container weight.
Checkweighing
How to compare item weight against lower and upper limits for checkweighing.
Simple Counting
Steps for performing simple counting operations using sample sizes.
Accumulation, Accumulation Display and Accumulation Clearing
Managing accumulated weights: adding, displaying, and clearing.
Unit setting menu
Methods to enter the unit setting menu for configuring weight units.
Calibration
Linear Calibration
Procedure for calibrating the scale using multiple points to ensure linearity.
Single Point Calibration
Process for calibrating the scale at a single point for basic accuracy.
Setting Mode & Description of Parameter Values
Setting Mode
How to enter the setting mode and navigate through available setting items.
P00 Set the period of inactivity
Configuring the auto-off timer based on inactivity periods.
P01 Set Check Weighing buzzer beep
Setting the buzzer behavior for checkweighing based on weight limits.
P02 Set the desired external devices
Selecting external devices like printers or PCs for scale output.
P03 Set RS-232 Serial Transmission Rate
Configuring the baud rate for RS-232 serial communication.
P04 Set Checkweighing value in memory or not
Determining whether checkweighing values are retained after power off.
P05 Set Parity check
Enabling or disabling parity check for serial communication.
P06 Set the activation mode of backlight
Configuring backlight activation based on item presence or key presses.
P07 Set Print mode
Selecting the print mode: manual, stable, or continuous.
P08 Set the filtering level
Adjusting the filtering level for stable indication and stabilization time.
P09 Set the range in which the Zero indication turns on
Defining the range for zero indication based on scale divisions.
P10 Initial Setup
Information about initial setup, which is not available.
P11 Unit setting
Referencing section 5-6 for unit setting configurations.
Serial Interface
RS-232 Connector
Diagram and pinout details for the RS-232 serial interface connector.
Single Option
Description of optional integrated boards for RS232, RTC, and Relay functions.
Troubleshooting and Error Message
E02 no.samp PCS no sampling
Troubleshooting error E02 related to PCS no sampling.
E04 EE.ERR EEPROM access error
Troubleshooting error E04 concerning EEPROM access issues.
E05 out.ran Overload condition
Troubleshooting error E05 indicating an overload condition on the scale.
E07 E.Lo>Hi
Troubleshooting error E07 where upper limit is less than lower limit.
E08 CK.UNIT
Troubleshooting error E08 for unit mismatch in checkweighing.
EU.nit
Troubleshooting error EU.nit related to improper accumulation units.
Need help?
Do you have a question about the 3K and is the answer not in the manual?
Questions and answers