Specifications - Denon AVR-1404 Operating Instructions Manual

ENGLISH

20 SPECIFICATIONS

Audio section
2
• Power amplifier
Rated output:
Output terminals:
• Analog
Input sensitivity / input impedance:
Frequency response:
S/N ratio:
Video section
2
• Standard video jacks
Input / output level and impedance:
Frequency response:
• S-video jacks
Input / output level and impedance:
Frequency response:
Tuner section
2
Receiving range:
Usable sensitivity:
50 dB quieting sensitivity:
S/N ratio:
Total harmonic distortion:
General
2
Power supply:
Power consumption:
Maximum external dimensions:
Mass:
Remote control unit (RC-942)
2
Batteries:
External dimensions:
Mass:
50
Front:
Center:
Surround:
Front:
Center/Surround:
200 mV / 47 k /kohms
10 Hz ~ 100 kHz: +1, –3 dB (TONE DEFEAT ON)
98 dB (IHF-A weighted) (TONE DEFEAT ON)
1 Vp-p, 75
5 Hz ~ 10 MHz — +1, –3 dB
Y signal — 1 Vp-p, 75
C signal — 0.286 Vp-p, 75
5 Hz ~ 10 MHz — +1, –3 dB
[FM] (note: µV at 75
87.50 MHz ~ 107.90 MHz
1.0 µV (11.2 dBf)
MONO
STEREO
MONO
STEREO
MONO
STEREO
AC 120 V, 60 Hz
3.8 A
434 (W) x 147 (H) x 417 (D) mm (17-3/32" x 5-25/32" x 1-23/64")
10.3 kg (22 lbs 11.3 oz)
R6P/AA Type (two batteries)
55 (W) x 225 (H) x 34.5 (D) mm (2-11/64" x 8-55/64" x 1-9/64")
165 g (Approx. 5.8 oz) (including batteries)
* For purposes of improvement, specifications and design are subject to change without notice.
75 W + 75 W (8 /ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)
110 W + 110 W (6 /ohms, 1 kHz with 0.7% T.H.D.)
75 W (8 /ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)
110 W (6 /ohms, 1 kHz with 0.7% T.H.D.)
75 W + 75 W (8 /ohms, 20 Hz ~ 20 kHz with 0.08% T.H.D.)
110 W + 110 W (6 /ohms, 1 kHz with 0.7% T.H.D.)
A or B 16 to 16 /ohms
A + B 12 to 16 /ohms
16 to 16 /ohms
/ohms
/ohms
/ohms
/ohms, 0 dBf = 1 x 10 –
1.6 µV (15.3 dBf)
23 µV (38.5 dBf)
80 dB (IHF-A weighted)
75 dB (IHF-A weighted)
0.15% (1kHz)
0.3% (1kHz)
15
W) [AM]
520 kHz ~ 1710 kHz
18 µV