Setting Up The System - Denon AVR-1404 Operating Instructions Manual

ENGLISH

10 SETTING UP THE SYSTEM

• Once all connections with other AV components have been completed as described in "CONNECTIONS" (see pages 9 to 14), make the
various settings described below on the display.
These settings are required to set up the listening room's AV system centered around the this unit.
1
Set the slide switch to "AUDIO".
2
Use the following buttons to set up the system:
• System setup items and default values (set upon shipment from the factory)
Input the combination of speakers in your system and their
Speaker corresponding sizes (SMALL for regular speakers, LARGE for full-size,
Configuration full-range) to automatically set the composition of the signals output
from the speakers and the frequency response.
This selects the subwoofer speaker for playing deep bass
Subwoofer Mode
signals.
This parameter is for optimizing the timing with which the audio
Delay Time signals are produced from the speakers and subwoofer according to
the listening position.
Digital In This assigns the digital input jacks for the different input
Assignment sources.
NOTE:
• The system setup is not displayed when "HEADPHONE ONLY" is selected.
16
System setup
SYSTEM SETUP button
Press this to display the system setup on the display.
CURSOR buttons ( , , , )
• ª 0 1
Press this change what appears on the display.
ENTER button
Press this to switch the display.
Also use this button to complete the setting.
Front Sp.
Large
Front & Subwoofer
12 ft (3.6 m)
Digital
COAXIAL OPTICAL
Inputs
Input
DVD/VDP TV/DBS
source
Default settings
Center Sp. Surround Sp.
Small Small
Subwoofer mode = Normal
Center Surround L & R
12 ft (3.6 m) 10 ft (3.0 m)
Sub Woofer
Yes
—
—