Setting The Speaker Distance - Denon AVR-1404 Operating Instructions Manual

Denon av surround receiver operating instructions avr-1404, avr-484
Hide thumbs Also See for AVR-1404:
Table of Contents

Advertisement

Available languages

Available languages

Setting the speaker distance

Input the distances from the listening position to the speakers and set the surround delay time.
Preparations:
Measure the distances from the listening position to the speakers (L1 to L3 on the diagram at the right).
L
:
Distance from center speaker to listening position
1
L
:
Distance from front speakers to listening position
2
L
:
Distance from surround speakers to listening position
3
CAUTION:
Set the center speaker at the same distance from the front speakers (left and right) or the subwoofer,
or so that the difference in distance (L2 – L1) is 5 feet or less.
Set the surround speakers (left and right) at the same distance from the front speakers (left and right)
or the subwoofer, or so that the difference in distance (L2 – L3) is 15 feet or less.
1
NOTE:
• The speaker distance can be adjusted between 0 and 60 feet in steps of 1 foot.
2
NOTE:
• No setting when "None" has been selected for the center speaker.
3
NOTE:
• No setting when "None" has been selected for the surround speakers.
Use the
(left) and
(right) buttons to set the distance from the front speakers and subwoofer to the
listening position.
• The number changes in units of 1 foot each time one of the buttons is pressed. Select the value closest
to the measured distance.
("/SW" appears only when subwoofer = yes.)
Press the ENTER or
(down) button to switch to the center speaker setting.
Use the
(left) and
(right) buttons to set the distance from the center speaker to the listening position.
• The number changes in units of 1 foot each time one of the buttons is pressed. Select the value closest
to the measured distance.
Press the ENTER or
(down) button to switch to the surround speakers setting.
Use the
(left) and
(right) buttons to set the distance from the surround speakers to the listening
position.
• The number changes in units of 1 foot each time one of the buttons is pressed. Select the value closest
to the measured distance.
Press the ENTER or
(down) button to enter the setting and switch the DIGITAL input (COAX) setting.
ENGLISH
Center
FR
FL
L
1
Listening
L
2
position
L
3
SR
SL
19

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Avr-484Dht-484xp

Table of Contents