Auto Tuning; Manual Tuning - Denon AVR-1404 Operating Instructions Manual

Auto tuning

1 2
1
3

Manual tuning

1 Set the input function to "TUNER".
2 Watching the display, press the BAND button to select the
desired band (AM or FM).
NOTE:
• When the manual tuning mode is set, FM stereo broadcasts are received in monaural and the "STEREO" indicator turns off.
4
4
2
1 Set the input source to "TUNER".
(Main unit)
2 Watching the display, press the BAND button to select the
desired band (AM or FM).
(Main unit)
3 Press the MODE button to set the auto tuning mode.
Lit
(Remote control unit)
4 Press the TUNING D D (+) or H H (–) button.
(Main unit)
• Automatic searching begins, then stops when a station is
tuned in.
NOTE:
• When in the auto tuning mode on the FM band, the "STEREO"
indicator lights on the display when a stereo broadcast is tuned in.
At open frequencies, the noise is muted and the "TUNED" and
"STEREO" indicators turn off.
3 Press the MODE button to set the manual tuning mode.
Check that the display's "AUTO" indicator turns off.
4 Press the TUNING D D (+) or H H (–) button to tune in the desired
station.
The frequency changes continuously when the button is held
in.
ENGLISH
(Remote control unit)
(Remote control unit)
(Remote control unit)
43