Table of Contents
Advertisement
Installing the Courier
1
Connect the male DB-25 end of your serial cable to the
Courier and the other end to a serial port on your computer.
2
If you are connecting the Courier to an IBM-compatible PC,
note the number of the serial port to which you connect the
Courier. If your serial ports are lettered instead of
numbered, A is COM1 and B is COM2.
3
Connect one end of the phone cable to the wall jack and the
other end to the Courier port labeled JACK.
If you have a telephone that you'd like to connect to the
Courier, plug its cable into the Courier port labeled PHONE.
4
Plug one end of the power adapter to the Courier and the
other end to a standard AC outlet.
5
Switch your computer's power on.
Setting the DIP Switches
The DIP switches are located on the bottom of the Courier. You
will probably not need to change the DIP switch settings.
2-4
Courier V.Everything External Modem: Getting Started
Figure 2-3. Location of the DIP Switches.
DIP Switches
Advertisement
Table of Contents
