Dos; Os/2 - US Robotics 002805-00 Getting Started

DOS

Because there is no communications software built in to DOS,
you must install and run a third-party communications software
package in order to operate the Courier.
The Quick Link II diskette, which is included in the package
with the Courier, contains a DOS version of the software as well
as a Windows version.
You must choose the COM port to which the Courier is attached
in whatever communications software package you are using.
For instructions about how to set up your DOS communications
software package, call our fax-on-demand service (at 800-762-
6163 or 847-676-1598) or our BBS (at 847-982-5092). Request
document 10000 for a list of our technical support documents.

OS/2

To get the best performance, you should replace the standard
OS/2 serial port drivers COM.SYS and VCOM.SYS with SIO.SYS
and VSIO.SYS. You can get these enhanced drivers from our
BBS at 847-982-5092. Check file area 18, OS/2 Support, Utilities,
etc for SIO153.ZIP.
For help with OS/2 Warp installations, download the file
WARPIN.ZIP from BBS file area 18, OS/2 Support, Utilities, etc.
For instructions about how to set up your OS/2 communications
software package, call our fax-on-demand service (at 800-762-
6163 or 847-676-1598) or our BBS (at 847-982-5092). Request
document 10000 for a list of our technical support documents.
3-6 Courier V.Everything External Modem: Getting Started