Setting The Dip Switches - US Robotics Courier V.Everything 3CP3453 Getting Started Manual

Setting the DIP Switches

The DIP (Dual In-line Package) switches are located on the
bracket of the Courier. The default settings are suitable for most
applications, but review this section to be sure they suit yours.
Table 2-1. DIP Switch Settings.
DIP Factory
Switch Setting
1 OFF
2 OFF
3 ON
4 OFF
5 ON
6 OFF
7 OFF
1
For more information, refer to the indicated chapter in the Courier Modems
Command Reference.
2-8 Courier V.Everything Internal Modems: Getting Started
Setting Effect
OFF DTR normal
ON Ignore DTR
OFF Verbal result codes
ON Numeric result codes
OFF Suppress result codes
ON Display result codes
OFF Echo offline commands
ON Don't echo offline commands
OFF Auto-answer
ON Don't auto-answer
OFF Normal Carrier Detect
ON Carrier Detect always on
OFF Display all result codes
ON Display result codes only when
originating calls
DIP Switches
For
More
1
Info
Ch 6
Ch 5
Ch 5
Ch 2
Ch 3
Ch 6
Ch 5