BenQ PDP46W1 - 46W1 - 46" Plasma Panel User Manual page 31

Note: The plasma display is coated with phosphor (same as CRT). When the screen
is displaying statically for a long time, an afterimage may appear and affect the
quality of the image. The screen saver forces to move the image at a given
time to avoid producing afterimage.
(5) Misc. Page:
PC
The function of this page includes OSD Position (9 positions), OSD Timeout, OSD
Rotation (by 90°), Color Temp, Reset to Default and PIP Setting.
The "PIP
Video/S-Video/Component terminals must have input signals for this option). Press the
button on the Display or the "►" key on the remote controller to complete the settings as
shown on Fig. 5-1.
Select "User" from "Color Temp" when inputting Video signals, and press the button on
the Display or the "►" key on the remote controller in the "User Color Temp" option to
complete the settings as shown in Fig. 5-2.
Note: To select "User" from "Color Temp", your must set the brightness of
red/green/blue on the "Display" page.
(5-1) PIP Setting (for PC mode only):
To access the options of the page, select "PIP Setting" from the "Misc." page when
inputting PC signals.
The "Display" page is same as the "Display" page in Video mode. The "Image" page is
used to enable and disable PIP, set PIP size, PIP source and PIP position.
² Î ¤ @ Â ½ Ä ¶ C:\pdp ¨ Æ ° È \User Menu\UM_BenQ.doc 5/30/2002 8:42 PM
Setting" option
VIDEO
is enabled when
30
inputting PC signals
Wuys
(the