BenQ PDP46W1 - 46W1 - 46" Plasma Panel User Manual page 16

PC Module + Video Module
A. CVBS OUT: Is a composite video output terminal (BNC connector)
B. Audio 2: Is an audio input terminal connecting to the audio output terminal
C. CVBS In: Is a composite video input terminal (RCA connector) connecting
D. S-Video: Iis a Y/C S-Video input terminal (DIN 4 PIN) connecting to the
E. Y/CbPb/CrPr: Is a component video input terminal (RCA connector)
F. Audio 1: Is a audio input terminal connecting to the audio output terminal of
PC Module + Enhanced PC Module
A. D-SUB OUT: Is a D-SUB 15 PIN analog video input connector connecting
B. R/G/B/Hs/Vs: Is a five-wire analog output connector (BNC connector)
C. D-SUB In: Connects to the D-SUB 15 PIN analog output connector of the
D. PC Audio: Connects to the audio output connector of the PC sound card.
² Î ¤ @ Â ½ Ä ¶ C:\pdp ¨ Æ ° È \User Menu\UM_BenQ.doc 5/30/2002 8:42 PM
connecting to other displays.
of the video output device. This terminal is shared by CVBS In and
S-Video.
to the video output terminal of the video output devices.
S-output terminal of the video output device.
connecting to the component input terminal of the video output device.
the video output device.
component video signals.
to other displays and used as a second output device. (Refer to 6.3.)
connecting to the horizontally and vertically synchronous red/green/blue
output terminals of the PC display card.
PC display card. The Display is used as a PC monitor.
The Display can output PC sound.
This terminal is the audio input end of the
15
Wuys