Table of Contents
Advertisement
8.7.2 Functions of OSD Pages:
(1) Display Page:
PC
The brightness, contrast and reset can be adjusted when inputting PC signals.
brightness of the red, green and blue can be adjusted when selecting "User Color Temp"
from the Misc. page.
The brightness, contrast, saturation, hue, sharpness and reset can be adjusted when
inputting Video signals.
(2) Image and AV System Page:
PC
7.5¿ Ã ¹ õ ¥ \ ¯ à
When inputting PC signals, the horizontal position, vertical position, phrase and
synchronous signals can be adjusted, and the aspect ratio and DPMS is enabled or disabled.
You can adjust the screen and select the signal format you want when Video signals are
input.
When you don't know which signal format is to be selected, select "Auto
Selection". The Display will select the signal format for you automatically.
The Display provides six aspect ratio formats. You can select the most suitable format
for the selected signal source. Press the "◄/►" keys on the remote controller or the
Display to select Full, Fill Aspect Ratio, 4:3 to 16"9, LB to 16:9, LB Subtitles to 16:9 and
Anamorphic sequentially.
² Î ¤ @ Â ½ Ä ¶
C:\pdp ¨ Æ ° È
\User Menu\UM_BenQ.doc 5/30/2002 8:42 PM
VIDEO
VIDEO
28
The
Wuys
Advertisement
Table of Contents
