Related Manuals for Dalsa Spyder3 SG-11-01k40-00-R
Summarization of Contents
Spyder3 GigE Vision Camera Features and Specifications
1.1 Camera Highlights
Key features and programmability of the camera.
1.2 Camera Performance Specifications
Detailed technical specifications including resolution, pixel size, and speed.
1.4 Responsivity
Spectral responsivity graphs for different sensitivity modes.
1.5 Supported Industry Standards
Compliance with GigE Vision and GenICam standards.
Mechanical and Interface Details
2.1 Mechanical Interface
Mechanical dimensions and connector layouts for 1k/2k and 4k models.
2.2 Mounting
Recommendations for camera mounting to manage heat dissipation.
2.3 Optical Interface
Information on illumination and light sources for image capture.
2.4 Electrical Interface
EMC compliance standards and guidelines for electrical connections.
Camera Setup and Installation
3.1 Installation Overview
Step-by-step guide for installing the camera and software.
3.2 Equipment Recommendations
Minimum PC and network requirements for optimal performance.
3.4 Camera Connectors
Details on GPIO, Ethernet, and power connectors, including pinouts.
Camera Control and Operation Modes
5.1 GenICam Interface & Commands
Using GenICam for camera control and available commands.
5.3 First Power Up Camera Settings
Default factory settings upon initial camera power-up.
5.4 Output Format & Sensitivity Modes
Settings for sensitivity mode, pixel format, and sensor shift direction.
5.5 Timing: Exposure and Synchronization
Configuration of exposure, line rate, and synchronization triggers.
Image Processing and Calibration
5.7 Data Processing Chain
Overview of analog and digital processing steps for image enhancement.
Calibrating for Non-Uniformity (Flat Field Correction)
Procedure for flat field correction to remove image non-uniformities.
5.8 Saving and Restoring Settings
How to save and restore camera configurations and coefficients.
Diagnostics, Troubleshooting, and Support
5.9 Diagnostics
Generating test patterns, temperature and voltage measurements.
5.10 Error Handling
Table of warning and error messages with descriptions and causes.
Appendix D Troubleshooting
Common problems and solutions for camera setup and operation.
Product Support
Information and contact details for obtaining technical assistance.
Need help?
Do you have a question about the Spyder3 SG-11-01k40-00-R and is the answer not in the manual?
Questions and answers