Parameter Setting - Mustek POWERMUST 1008 ONLINE LCD User Manual

Step 2 Select remote shutdown conditions.
Step 3 Add/Delete remote system IP address.
Step 4 Click "Apply" button to save all data.
NOTE: Click "Default" button to recover the default setting.
Conditions:
UPS works on battery mode Remote systems shutdown after xx min xx sec:
When clicking the checkbox, remote systems which are powered by monitored
UPS will shut down after monitored UPS running on battery mode for xx min xx
sec. The maximum setting number for minutes is 999, and for seconds is 59.
Remote systems shutdown when UPS is at low battery level: When clicking the
checkbox, remote systems which are powered by monitored UPS will shut down
when monitored UPS is at low battery level.

4.2.3. Parameter Setting

Some UPS functions can be set and changed via software. Parameter setting includes
backup time setting for P1, battery number setting, voltage and frequency range
setting for bypass mode, and voltage range setting for ECO mode.
Diagram 4-13
28