Remote Shutdown - Mustek POWERMUST 1008 ONLINE LCD User Manual

power off. The default setting is clicked.
Accept shutdown command from remote system: When clicking the checkbox, it
accepts shutdown command from specific remote PCs. Please enter IP address
of remote systems in blank column and click "Add" button to add into list.
UPS shutdown while system shutdown: When click the checkbox, monitored
UPS will shut down after local system shuts down. The UPS shutdown time will
be later than system complete shutdown time. The default setting is clicked. But
users can choose to shut down the system without shutting down the monitored
UPS.
Power-off option: Selecting power-off method for above shutdown system.
Shutdown: When clicking the checkbox, the selected system will shut down. The
default setting is clicked.
Sleep mode: When clicking the checkbox, selected system will suspend the
system instead of a normal shutdown. But this function is only supported by
Windows 2000 or higher on supported hardware.
Delay time to shutdown system: Enter the delay time to shut down the
operating system. The value range is from 1 to 99 minutes.
On shutdown execute file: Enter the path of execute file.
Warning Dialog Setting:
Pop-up dialog before shutdown: Timer setting for pop-up warning dialog
displayed in local PC. Local PC will pop up a warning dialog before system
starts to shut down. The range is from 1 to 999 seconds.
Warning dialog interval: Reminding dialog interval setting. This setting also
applies for UPS shutdown because of power failure. The range is from 1 to 999
seconds.

4.2.2. Remote Shutdown

This configuration is to remote shut down specific PCs which are powered by monitored
UPS.
Step 1 Select UPS Setting >> Remote Shutdown. Refer to Diagram 4-13.
27