Step 2 Enter old password, new password, and retype new password in confirm
password column to modify password for administrator. (The password should
be at least 6 digits) Then click "Apply" button to successfully modify password
for administrator.
NOTE1: Simply click "Login" button on the top right corner to log in the software.
NOTE2: If password is forgotten, it's necessary to re-install the software.
4.1.2. SMS Configuration
It's for entering SMS receiver list. In the event of an alarm condition occurring, a
message about UPS status will be sent to the specified users via mobile phone. For the
event receiving list, please configure in "Event Action" column (refer to section 4-1-4).
Step 1 Choose ViewPower Configuration >> SMS. Refer to Diagram 4-2.
Diagram 4-1
15