Event Action Configuration - Mustek POWERMUST 1008 ONLINE LCD User Manual

NOTE: If using Exchange server for mailbox system, it's required to have certified
Exchange server（Viewpower configuration -> Certificates management） before
normal operation.

4.1.4. Event Action Configuration

It's to configure response actions for UPS events. software provides six response
actions after events occur.
1. Event record: It will record event to data log in software after events occur.
This function is default selected.
2. Computer alarm: Computer will beep to remind users after events occur. This
function is only available for Windows OS.
3. Warning dialog (local): It will pop up a message dialog around the software
orange plug icon in taskbar after events occur. This function is default selected.
4. Broadcast: It will send the event message to all PCs with software installed in
LAN network.
5. SMS: It will send the event message to specific mobile phone numbers after
events occur.
6. E-mail: It will send the event e-mail to assigned e-mail accounts after events
occur.
Step 1 Select ViewPower Configuration >> Event Actions. Refer to Diagram 4-6.
19