Grounding The Generator - GE HOME GENERATOR 10000 WATT Installation And Start-Up Manual

Generator ac connection system
A single-phase, three-wire AC connection system is used in
33
Neutral
the home generator. The stator assembly consists of a pair
22
of stationary windings with two leads brought out of each
winding. The junction of leads 22 and 33 forms the neutral
lead, as shown schematically and as a wiring diagram. A
complete schematic and wiring diagram can be found later
in this manual.
120V
Neutral is not bonded to ground at generator.
120V
Circuit
Breaker
11
240V
44
22 33 44 11 0
Circuit
Breaker
Neutral Line 2 Line 1 Ground
To Transfer Switch

Grounding the Generator

Ground the home generator per applicable codes, standards,
and regulations. The generator GND lug is located inside the
control panel box.
16